7. Click the Commit button.
8. When the device attempts to connect to the network, a sign-on screen is displayed.
9. Enter the Username and Password. Click the OK button.
10. Verify the device is authenticated by reviewing the Status tab. When the device is property configured, the indi-
cates the device is Authenticated and the method used.
11. The sign-on screen is displayed after a reboot.
Note: See
Configuring the Profile
(page 5-16) for more details.
If a user enters invalid credentials and clicks OK, the device associates but does not authenticate. The user is again
prompted to enter credentials.
If the user clicks the Cancel button, the device does not associate. The user is not prompted again for credentials until:
• the device is rebooted,
• the radio is disabled then enabled,
• the Reconnect button on the is clicked or
• the profile is modified and the Commit button is clicked.
5 - 14