Eap-Fast - Honeywell Thor VX9 User Manual

EAP-FAST

To use EAP-FAST, make sure the following profile options are used.
• Enter the SSID of the Access Point assigned to this profile
• Set EAP Type to EAP-FAST
• Set Encryption to WPA TKIP
• Set Auth Type to Open
To use another encryption type, select WPA CCKM, WPA2 AES or WPA2 CCKM for encryption and complete other
entries as detailed in this section.
The SCU supports EAP-FAST with automatic or manual PAC provisioning. With automatic PAC provisioning, the user
credentials, whether entered on the saved credentials screen or the sign on screen, are sent to the RADIUS server.
The RADIUS server must have auto provisioning enabled to send the PAC provisioning credentials to the Thor VX9.
For automatic PAC provisioning, once a username/password is authenticated, the PAC information is stored on the
Thor VX9. The same username/password must be used to authenticate each time. See the note below for more
details.
For manual PAC provisioning, the PAC filename and Password must be entered.
See Sign-On vs. Stored Credentials (page 5-48) for information on entering credentials.
The entries on the Credentials screen are determined by the type of credentials (stored or sign on) and the type of PAC
provisioning (automatic or manual).
Click on the Credentials button.
To use Stored Credentials, click on the Credentials button. No entries are necessary for Sign-On Credentials with
automatic PAC provisioning as the user will be prompted for the Username and Password when connecting to the net-
work.
To use Sign-On credentials:
• Do not enter a User and Password as the user will be prompted for the Username and Password when connecting
to the network.
To use Stored Credentials:
5 - 59