Restart/Shutdown; Soft Keyboard; Calibrate Touch Screen; Touch Screen - Honeywell Thor VX9 User Manual

Restart/Shutdown

Use the Windows interface to restart or shut down the Thor VX9.
Windows 7 Professional:
right arrow list menu
Start > Shut down
Start > Shut down
Windows Embedded Standard, XP Professional, XP Embedded:
Start > Shut down > Restart
Start > Shut down > Shut down

Soft Keyboard

The optional soft keyboard can be enabled and configured from the keyboard control panel in the MountFocus software.
Tap Start > Programs > MountFocus POS > Keyboard Control Panel

Calibrate Touch Screen

To calibrate the touch screen, access the touch screen software, select:
• Tap Start > Programs > UPDD > Calibrate and touch the center of the cross displayed on screen and release. Repeat
as the cross is displayed in various locations. The utility closes automatically upon calibration completion.

Touch Screen

Calibrating the Touch Screen

Although the touch screen is installed and calibrated at the factory, users may make adjustments to the calibration. To cali-
brate the touch screen, select Start > Programs > UPDD > Calibrate.
The calibration utility displays a cross on the screen. Touch the center of the cross with the stylus and hold for a few sec-
onds. Release and repeat with the next cross. After all locations have been touched, the calibration utility automatically
closes.
If no input is received, the calibration utility times out. Press ESC to exit the calibration utility without saving any changes.

Disabling the Touch Screen

If desired, the touch screen can be disabled in the Windows control panel. Once disabled, the touch screen remains dis-
abled until it is enabled again.
To disable the touch screen tap:
Windows 7 Professional:
Start > Control Panel > System > Device Manager > Mice and other pointing devices
Windows Embedded Standard, XP Professional, XP Embedded:
Start > Control Panel > System > Hardware > Device Manager > Mice and other pointing devices
Click on the list. In the list is a listing for Universal Pointer Device Driver. Right-click on this listing and select Disable from
the menu.
To enable the touch screen, follow the same process, selecting Enable from the right-click menu.
4 - 8
> Restart