Accessories; Preparing Procedures & Basic Operation; Receiver// Us-8010D/ Us-8010 - JTS US-8010D Instruction Manual

4-5 Accessories

48 AC/DC adaptor
Switching Power Supply(100V~240V , 50~60Hz)
A
Linear Power Supply (220V , 50Hz)
B
Linear Power Supply (220V , 60Hz)
C
Screwdriver
49
Option
50 DR-900 dual rack adaptor
RP-900 panel cover
51 Option
52 AF output cable (with Φ6.3 plug at both ends)
GC-80/GC-100 Guitar Cable
53
GC-80L/GC-100L Guitar Cable
54
A
48
B C
52
11
WIRELESS MICROPHONE SYSTEM
Option
Option
Option
Option
50
51
54
53
5. Preparing Procedures & Basic Operation
5-1 Receiver // US-8010D / US-8010
(1) Audio Output Connector
The receiver equipped with both balanced XLR output and unbalanced φ 6.3mm jack output;
you can choose the proper way for using.
Connect one end of the Audio cable to the AF output socket in the rear panel of the receiver and
plug another end to the "MIC IN" input socket of a mixer or amplifier. (Step 1 of Figure 1)
(2) Power connection
Connect one end of AC/DC adaptor cable to DC input socket in the rear panel of the receiver,
and plug another end into an AC outlet. (Step 2 of Figure 1)
49
MIXER
DC INPUT
AC/DC ADAPTOR
2
AC POWER SOCKET
1
AUDIO OUTPUT
12