ICEROCK3-T10 Tablet PC
5.4.2.1 Graphics Configuration
Use the Graphics Configuration menu (
settings
Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
Chipset
Graphics Configuration
Primary Display
DVMT Pre-Allocated
DVMT Total Gfx Mem
Primary IGFX Boot Display
Current LCD Panel Type
Version 2.15.1229. Copyright (C) 2012 American Megatrends, Inc.
BIOS Menu 17: Graphics Configuration
Primary Display [Auto]
Use the Primary Display option to select the graphics controller used as the primary boot
device.
Auto
IGFX
PEG
DVMT Pre-Allocated [256M]
Use the DVMT Pre-Allocated option to specify a fixed amount of memory that can be
allocated for the internal graphics device. Configuration options are listed below.
32M
64M
B IOS Menu 17) to configure the graphics
4
[Auto]
[256M]
[MAX]
[VBIOS Default]
1280x800 24BIT
D
EFAULT
Select which of
IGFX/PEG/PCI Graphics
device should be Primary
Display Or select SG for
Switchable Gfx.
---------------------
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Exit
ESC: Exit
Page 73
Need help?
Do you have a question about the ITCW1010 and is the answer not in the manual?