Unpacking - I-Tech ITCW1010 User Manual

WARNING:
When installing the ITCW1010, make sure to:
Turn the power off: Chance of electrocution. Turn off the monitor

and unplug it from the power supply.

Only let certified engineers change the hardware settings:
Incorrect settings can cause irreparable damage to the product.
 Take anti-static precautions: Electrostatic discharge can destroy
electrical components and injure the user. Users must ground
themselves using an anti-static wristband or similar device.
The installation steps below should be followed in order.
Unpack the tablet PC
Step 1:
Check all the required parts are included
Step 2:
Charge the system
Step 3:
Install SIM card or microSD card (if necessary)
Step 4:
Mount the tablet PC
Step 5:
Connect peripheral devices to the side panel of the ITCW1010
Step 6:

2.1 Unpacking

To unpack the ITCW1010, follow the steps below:
WARNING!
Only remove the protective plastic cover stuck to the front screen after
installation. The plastic layer protects the monitor surface during
installation process.
Use sharp cutters to open the box.
Step 1:
Page 12
ICEROCK3-T10 Tablet PC
S t e p 0 :