Sim Card Installation (Optional); Using Rfid Reader; Figure 3-8: Sim Card Installation - I-Tech ITCW1010 User Manual

ICEROCK3-T10 Tablet PC

3.4 SIM Card Installation (Optional)

This section covers the installation of a SIM card for mobile network connections on the
ITCW1010 models with optional mobile 3.75G module.
Open the I/O cover on the side panel. Locate the SIM card slot.
Step 1:
Install the SIM card in the slot indicated below.
Step 2:

Figure 3-8: SIM Card Installation

Replace the I/O
Step 3:

3.5 Using RFID Reader

There is a RFID reader on the front panel. To use the RFID reader, follow the steps below.
Check the RFID status indicator on the front panel to make sure the RFID
Step 1:
function is enabled (see Section 1.4.1). The RFID function is enabled by default
in the BIOS menu. If the RFID reader is disabled, please go to Chipset 
PCH-IO Configuration BIOS menu to enable it (refer to Section 5.4.1).
Follow the instruction described in Section 4.7 to install the RFID driver.
Step 2:
Double click the PcscTool icon in the RFID folder in the driver CD.
Step 3:
cover.S t e p 0 :
Page 21