ICEROCK3-T10 Tablet PC
Click the Port Settings button on the tool bar. Refer the following information to
Step 5:
configure the COM port settings for the barcode scanner. After the configuration,
click the Config Comm button (
Port Number: COM2
Baud Rate: 115200
Parity Bits: None
Date Bits: 8
Stop Bits: 1
Hand Shaking: 0-None
Figure 3-19: EZConfig-Scanning – Port Settings
The Config Comm button turns from red to green, meaning the program is
Step 6:
successfully connected to the barcode scanner.
F igure 3-19).
3
Page 27