User Manual Industrial Tablet PC Intel® Core™ i7 CPU, 8 GB DDR3 SDRAM, USB 3.0, Micro HDMI, microSD Slot, 802.11b/g/n Wireless, RFID, Barcode Scanner, Mobile 3.75G, IP 65, RoHS Compliant i-Tech Company LLC TOLL FREE: (888) 483-2418 EMAIL: info@iTechLCD.com WEB:...
Page 2
ICEROCK3-T10 Tablet PC Revision Date Version Changes September 25, 2014 1.00 Initial release Page ii...
Page 3
ICEROCK3-T10 Tablet PC Copyright COPYRIGHT NOTICE In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages. This document contains proprietary information protected by copyright.
ICEROCK3-T10 Tablet PC Table of Contents 1 INTRODUCTION......................1 1.1 O ........................2 VERVIEW 1.2 M ....................3 ODEL ARIATIONS 1.3 F ........................3 EATURES 1.4 F ......................4 RONT ANEL 1.4.1 Status Indicators ....................4 1.5 R ....................... 6 ANEL 1.6 S ......................
Page 5
ICEROCK3-T10 Tablet PC 4 DRIVER INSTALLATION..................36 4.1 A ................37 VAILABLE OFTWARE RIVERS 4.2 I ® C ..................37 NTEL HIPSET RIVER 4.3 I ® G ..................38 NTEL RAPHICS RIVER 4.4 3.75G D ......................40 RIVER 4.5 A ......................
Page 6
ICEROCK3-T10 Tablet PC 5.5 B ........................75 5.6 S ......................... 77 ECURITY 5.7 E ......................... 78 6 SYSTEM MAINTENANCE ..................80 6.1 S ..............81 YSTEM AINTENANCE NTRODUCTION 6.2 M ................81 OTHERBOARD EPLACEMENT 6.3 B ..................81 ATTERY EPLACEMENT A SAFETY PRECAUTIONS ..................
Page 7
ICEROCK3-T10 Tablet PC List of Figures Figure 1-1: ITCW1010 ........................2 Figure 1-2: Front Panel ........................4 Figure 1-3: Front Panel LED Indicators ..................4 Figure 1-4: Rear Panel........................6 Figure 1-5: Side Panel ........................6 Figure 1-6: Top Panel ........................7 Figure 1-7: Bottom Panel .......................7 Figure 1-8: Dimensions (units in mm) ..................10...
Page 8
ICEROCK3-T10 Tablet PC Figure 3-23: u-center Window .....................31 Figure 3-24: VESA Mount Screw Holes ..................31 Figure 3-25: Left Side I/O Connectors ..................32 Figure 3-26: Audio Connectors ....................33 Figure 3-27: Micro HDMI Device Connection................34 Figure 3-28: USB Device Connection ..................35 Figure 4-1: Chipset Driver Location....................38 Figure 4-2: Graphics Driver Location ..................39 Figure 4-3: Intel®...
Page 9
ICEROCK3-T10 Tablet PC List of Tables Table 1-1: Model Variations ......................3 Table 1-2: Status Indicators......................5 Table 1-3: Technical Specifications....................9 Table 2-1: Packing List.........................13 Table 2-2: Optional Items......................14 Table 5-1: BIOS Navigation Keys ....................51 Page ix...
Page 10
ICEROCK3-T10 Tablet PC BIOS Menus BIOS Menu 1: Main ........................52 BIOS Menu 2: Advanced ......................54 BIOS Menu 3: ACPI Configuration ....................54 BIOS Menu 4: RTC Wake Settings ....................55 BIOS Menu 5: Trusted Computing ....................57 BIOS Menu 6: CPU Configuration ....................58 BIOS Menu 7: SATA Configuration .....................60 BIOS Menu 8: Intel(R) Rapid Start Technology .................61 BIOS Menu 9: USB Configuration ....................62...
ICEROCK3-T10 Tablet PC 1.1 Overview Figure 1-1: ITCW1010 The ITCW1010 is an industrial tablet PC with a 10.1 inch touchscreen and an IP 65 rating protection. The ITCW1010 features an Intel® Celeron® 1007U or Intel® Core™ i7-3517 processor with DDR3 SDRAM on-board.
ICEROCK3-T10 Tablet PC 1.2 Model Variations The ITCW1010 series has three models. All of the models are equipped with a projected capacitive touchscreen, IPS, 802.11b/g/n Wi-Fi and Bluetooth v3.0. The model variations are listed below. Models Intel Memory 3.75G RFID...
Figure 1-2: Front Panel 1.4.1 Status Indicators Figure 1-3: Front Panel LED Indicators There are four LED indicators on the front panel of the ITCW1010 as show in the figure above. The following table contains descriptions of their functions. Page 4...
ICEROCK3-T10 Tablet PC Status Indicator Description Off: the system is fully charged or not being charged Battery Battery 1 is being charged. Solid red: Battery 2 is being charged. Solid blue: Battery 1 is low Blinking red: Battery 2 is low Blinking blue: Off: the barcode scanner or the RFID reader is off Barcode/RFID...
ICEROCK3-T10 Tablet PC 1.5 Rear Panel The rear panel consists of the built-in battery and VESA mounting holes. The optional 5-megapixel camera is also located on the rear panel. Figure 1-4: Rear Panel 1.6 Side Panels The right side panel has a barcode on/off button. The left side panel consists of I/O ports and slots.
ICEROCK3-T10 Tablet PC 1.7 Top Panel The barcode scanner is located on the top panel shown in the following diagram. Figure 1-6: Top Panel 1.8 Bottom Panel The bottom panel has a USB 3.0 connector for installing USB peripheral devices or the charging adapter.
ICEROCK3-T10 Tablet PC 1.9 Technical Specifications The technical specifications for the ITCW1010 systems are listed in the table below. System ITCW1010 1.700 GHz Intel® Core i7-3517U processor 1.50 GHz Intel® Celeron® processor 1007U Chipset Intel® HM76 Memory 4.0 GB DDR3 SDRAM on board Optional 4.0 GB DDR3 SDRAM SO-DIMM...
ICEROCK3-T10 Tablet PC System ITCW1010 Power Battery Battery 1 (standard): 3700 mAH Li-ion battery pack with battery capacity LED indicators (five working hours) Battery 2 (optional): internal 3700 mAH battery pack (five working hours) Power Input 19 V DC input...
Install SIM card or microSD card (if necessary) Step 4: Mount the tablet PC Step 5: Connect peripheral devices to the side panel of the ITCW1010 Step 6: S t e p 0 : 2.1 Unpacking To unpack the ITCW1010, follow the steps below:...
ICEROCK3-T10 Tablet PC Remove the ITCW1010 and the packing material out of the box. Step 2: Make sure all the components listed in the packing list are present. Step 3: S t e p 0 : 2.2 Packing List The ITCW1010 tablet PC is shipped with the following components:...
ICEROCK3-T10 Tablet PC These optional items are also available. Item Image 3-in-1 combo reader (P/N: ICEROCK3-3IN1-R10) Charging station (P/N: ICEROCK3-CR01-R10) Carrying case (P/N: 7Z000-ICEROCK3-10POUCH) Table 2-2: Optional Items Page 14...
To charge the ITCW1010, follow the steps below. Install the charging adapter to the ITCW1010. Secure the charging adapter Step 1: by tightening the two retention screws on either side of the adapter.
ICEROCK3-T10 Tablet PC Figure 3-2: Charge Status LED The battery 1 capacity can be viewed by pressing the button on the battery pack Step 4: (Figure 3-3). Figure 3-3: Battery Capacity Indicators The user can also turn on the system to check the battery capacity via the Step 5: Windows Embedded 7 power management screen ( F igure 3-4).
The ITCW1010 can be charged through the optional charging station. To charge the system, install the ITCW1010 into the charging station as shown in Figure 3-5. Then, connect the charging station with a power source through the power adapter came with the ITCW1010 package.
ICEROCK3-T10 Tablet PC Figure 3-5: Charge the System through Charging Station 3.2 Power-up the System To power-up the system, push the power button on the top panel for few seconds until the power button lights up. Figure 3-6: Power Button Location Page 19...
ICEROCK3-T10 Tablet PC 3.3 SD Card Installation This section covers the installation of a microSD card. Open the I/O cover on the side panel. Locate the microSD card slot. Step 1: Install the microSD card in the slot indicated below. Step 2: Figure 3-7: Install microSD Card Replace the I/O...
3.4 SIM Card Installation (Optional) This section covers the installation of a SIM card for mobile network connections on the ITCW1010 models with optional mobile 3.75G module. Open the I/O cover on the side panel. Locate the SIM card slot.
ICEROCK3-T10 Tablet PC Figure 3-11: NXP PCSC Tool – Mode Selection Choose Select a Reader from the Reader menu ( Step 6: F igure 3-12). Figure 3-12: NXP PCSC Tool – Reader Selection The Select the reader window prompts. Select a RFID reader and click OK. See Step 7: Figure 3-13.
ICEROCK3-T10 Tablet PC Click the Arrow button shown in Figure 3-14 to read RFID card. Step 8: Figure 3-14: NXP PCSC Tool – Read RFID Card Use the RFID reader to read a RFID card. The RFID reader is located on the Step 9: front panel as shown in Figure 3-15.
ICEROCK3-T10 Tablet PC 3.6 Using Barcode Scanner Some models of the ITCW1010 have a barcode scanner on the top panel. To use the barcode scanner, follow the steps below. Check the barcode status indicator on the front panel to make sure the barcode Step 1: function is enabled (see Section 1.4.1).
ICEROCK3-T10 Tablet PC Click the Port Settings button on the tool bar. Refer the following information to Step 5: configure the COM port settings for the barcode scanner. After the configuration, click the Config Comm button ( F igure 3-19). ...
ICEROCK3-T10 Tablet PC Push the barcode on/off button on the right side panel to turn on the barcode Step 7: scanner. The barcode status indicator on the front panel lights up in red (if the RFID reader is enabled at the same time, the indicator will turns from blue to purple).
Figure 3-21: Barcode Information Display Area 3.7 Using GPS Evaluation Software To evaluate the GPS function on the ITCW1010 models with GPS module, please follow the instruction below. The GPS function is enabled by default in the BIOS menu. If the GPS function is Step 1: disabled, please go to Chipset ...
ICEROCK3-T10 Tablet PC Figure 3-22: GPS Evaluation Software Location The InstallShield Wizard screen appears. Follow the step-by-step instruction of Step 3: the installation wizard to install the u-center GPS evaluation software. After the installation is complete, double click the u-center icon on the desktop. Step 4: The u-center window appears ( F igure 3-23).
75 mm interface pad. The VESA mounting screw holes are located on the rear panel as shown in the following diagram. To mount the ITCW1010, please refer to the user manual that came with the mounting device. Figure 3-24: VESA Mount Screw Holes...
ICEROCK3-T10 Tablet PC 3.9 I/O Connectors The I/O connectors on the left side of the ITCW1010 extend the capabilities of the tablet PC but are not essential for operation (Figure 3-25). Figure 3-25: Left Side I/O Connectors 3.9.1 Audio connectors (Mic-in and Headphones) The audio jacks on the external audio connector enable the ITCW1010 to be connected to a stereo sound setup.
Step 0: 3.9.2 Micro HDMI Device Connection There is one Micro HDMI connector on the left side of the ITCW1010. To connect a HDMI device, please follow the instructions below. Located the Micro HDMI connector. The location of the Micro HDMI connector Step 1: is shown in Figure 3-25.
Figure 3-27: Micro HDMI Device Connection Insert the device connector. Once aligned, gently insert the HDMI device Step 3: connector into the connector on the ITCW1010. Step 0: 3.9.3 USB Device Connection There are two USB 3.0 connectors on the side panel. To connect a USB device, please follow the instructions below.
ICEROCK3-T10 Tablet PC Figure 3-28: USB Device Connection Insert the device connector. Once aligned, gently insert the USB device Step 3: connector into the connector on the ITCW1010. Step 0: Page 35...
USB 3.0 driver Wireless LAN driver Connect the Utility CD came with the ITCW1010 to the system and follow the installation instructions given below to install the drivers. NOTE: The chipset driver must be installed first, then the graphics driver. After finishing installing the chipset driver and graphics driver, the user can continue to install other drivers in any order.
ICEROCK3-T10 Tablet PC Figure 4-1: Chipset Driver Location There are three folders, and each folder contains chipset related drivers to be Step 2: installed. Double click the setup file in each folder and follow the step-by-step instruction of the installation wizard to install the drivers. 4.3 Intel®...
ICEROCK3-T10 Tablet PC Figure 4-2: Graphics Driver Location Double click the setup file in the folder. The Intel® Graphics Driver Step 2: InstallShield Wizard appears ( F igure 4-3). 4 7 4 Figure 4-3: Intel® Graphics Driver InstallShield Wizard Follow the step-by-step instruction of the installation wizard to install the Step 3: graphics driver.
ICEROCK3-T10 Tablet PC 4.4 3.75G Driver To install the driver for the 3.75G module, please follow the steps below. Select GOBI 3000 from the list of the driver CD. Locate the driver setup file in Step 1: the Drivers folder as shown in F igure 4-6.
ICEROCK3-T10 Tablet PC Figure 4-5: 3.75G Driver InstallShield Wizard Follow the step-by-step instruction of the installation wizard to install the HD Step 3: Audio driver. 4.5 Audio Driver To install the driver for the speaker and the microphone, please follow the steps below. Select Audio from the list of the driver CD.
ICEROCK3-T10 Tablet PC Figure 4-6: Speaker and Microphone Driver Location Double click the setup file in the folder. The InstallShield Wizard screen Step 2: appears ( F igure 4-7). Figure 4-7: Realtek HD Audio Driver InstallShield Wizard Follow the step-by-step instruction of the installation wizard to install the HD Step 3: Audio driver.
ICEROCK3-T10 Tablet PC 4.6 Bluetooth Driver To install the Bluetooth driver, please follow the steps below. Select Wireless LAN & Bluetooth from the list of the driver CD. Select the Step 1: Bluetooth folder as shown in F igure 4-8. Figure 4-8: Bluetooth Driver Location Double click the setup file in the folder.
ICEROCK3-T10 Tablet PC Figure 4-9: Bluetooth Driver InstallShield Wizard Follow the step-by-step instruction of the installation wizard to install the Step 3: Bluetooth driver. 4.7 RFID Driver To install the RFID driver, please follow the steps below. Select RFID from the list of the driver CD. Double click the setup file in the WIN7 Step 1: Driver folder to install the RFID driver ( F igure 4-11).
ICEROCK3-T10 Tablet PC Figure 4-10: RFID Driver Folder Follow the step-by-step instruction of the installation wizard (Figure 4-11) to Step 2: install the RFID driver. Figure 4-11: RFID Driver Installation Page 45...
NOTE: Two USB 3.0 drivers must be installed in order to enable all three USB 3.0 ports on the ITCW1010. One is included in the Chipset driver folder (see Section 4.2), and the other is in the USB 3.0 driver folder.
ICEROCK3-T10 Tablet PC Figure 4-13: USB 3.0 Driver InstallShield Wizard Follow the step-by-step instruction of the installation wizard to install the Step 3: graphics driver. 4.9 Wireless LAN Driver To install the wireless LAN driver, please follow the steps below. Select Wireless LAN &...
ICEROCK3-T10 Tablet PC Figure 4-14: Wireless LAN Driver Location Double click the setup file in the Install_CD folder. The InstallShield Wizard Step 2: screen appears (Figure 4-15). Figure 4-15: Wireless LAN InstallShield Wizard Follow the step-by-step instruction of the installation wizard to install the Step 3: Wireless LAN driver.
ICEROCK3-T10 Tablet PC 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. NOTE: Some of the BIOS options may vary throughout the life cycle of the product and are subject to change without prior notice.
ICEROCK3-T10 Tablet PC Function Decrease the numeric value or make changes Page up Move to the next page Page down Move to the previous page Main Menu – Quit and do not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu -- Exit current page and return to Main Menu F1 key General help, only for Status Page Setup Menu and Option...
ICEROCK3-T10 Tablet PC 5.2 Main The Main BIOS menu ( B IOS Menu 1) appears when the BIOS Setup program is entered. 5 8 4 The Main menu gives an overview of the basic system information. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset...
ICEROCK3-T10 Tablet PC The Main menu has two user configurable fields: System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year. System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds.
ICEROCK3-T10 Tablet PC Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit > ACPI Settings System ACPI Parameters > RTC Wake Settings > Trusted Computing > CPU Configuration > SATA Configuration ---------------------- >...
ICEROCK3-T10 Tablet PC ACPI Sleep State [S3 only (Suspend to RAM)] Use the ACPI Sleep State option to specify the sleep state the system enters when it is not being used. The system enters S1 (POS) sleep state. The S1 only (CPU Stop system appears off.
Page 66
ICEROCK3-T10 Tablet PC Wake System with Fixed Time [Disabled] Use the Wake System with Fixed Time option to specify the time the system should be roused from a suspended state. The real time clock (RTC) cannot generate a wake Disabled EFAULT event...
ICEROCK3-T10 Tablet PC 5.3.3 Trusted Computing Use the Trusted Computing menu (BIOS Menu 5) to configure settings related to the Trusted Computing Group (TCG) Trusted Platform Module (TPM). Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced Configuration Enables or Disables BIOS Security Device Support [Disable]...
ICEROCK3-T10 Tablet PC 5.3.4 CPU Configuration Use the CPU Configuration menu ( B IOS Menu 6) to view detailed CPU specifications 5 8 4 and configure the CPU. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced CPU Configuration Enable for Windows XP and Linux (OS optimized for Intel(R) Core(TM) i7-3517UE CPU @ 1.70GHz...
ICEROCK3-T10 Tablet PC Intel SMX Technology: Indicates if Intel SMX Technology is supported by the CPU. 64-bit: Indicates if 64-bit system is supported by the CPU. L1 Data Cache: Lists the amount of data storage space on the L1 cache. ...
ICEROCK3-T10 Tablet PC 5.3.5 SATA Configuration Use the SATA Configuration menu ( B IOS Menu 7) to change and/or set the 5 8 4 configuration of the SATA devices installed in the system. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced SATA Controller(s) [Enabled]...
ICEROCK3-T10 Tablet PC 5.3.7 USB Configuration Use the USB Configuration menu ( B IOS Menu 9) to read USB configuration information 5 8 4 and configure the USB settings. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced USB Configuration Enables Legacy USB support.
ICEROCK3-T10 Tablet PC Legacy USB support disabled Disabled Legacy USB support disabled if no USB devices are Auto connected 5.3.8 iWDD Serial Ports Configuration Use the iWDD Serial Ports Configuration menu ( B IOS Menu 10) to set or change the configurations for the serial ports.
ICEROCK3-T10 Tablet PC 5.3.8.1 Serial Port n Configuration Use the Serial Port n Configuration menu ( B IOS Menu 11) to configure the serial port n. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced Serial Port 1 Configuration Enable or Disable Serial Port (COM) Serial Port n Configuration...
ICEROCK3-T10 Tablet PC Serial Port I/O port address is 3F8h and the interrupt IO=3F8h; address is IRQ4 IRQ=4 Serial Port I/O port address is 3E8h and the interrupt IO=3E8h; address is IRQ3, 4 IRQ=3, 4 Serial Port I/O port address is 2F8h and the interrupt IO=2F8h;...
ICEROCK3-T10 Tablet PC Serial Port I/O port address is 3E8h and the interrupt IO=3E8h; address is IRQ3, 4 IRQ=3, 4 Serial Port I/O port address is 2E8h and the interrupt IO=2E8h; address is IRQ3, 4 IRQ=3, 4 5.3.9 H/W Monitor The H/W Monitor menu ( B IOS Menu 12) shows the operating temperature.
ICEROCK3-T10 Tablet PC 5.3.10 iTech Feature Use the iTech Feature menu ( BIOS Menu 13) to configure One Key Recovery function. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced iTech Feature Auto Recovery Function Reboot and recover Auto Recovery Function [Disabled] system automatically...
ICEROCK3-T10 Tablet PC 5.4 Chipset Use the Chipset menu ( B IOS Menu 14) to access the PCH and System Agent (SA) 5 8 4 configuration menus. WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction.
ICEROCK3-T10 Tablet PC 5.4.1 PCH-IO Configuration Use the PCH-IO Configuration menu ( B IOS Menu 15) to configure the PCH IO settings. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Chipset PCH-IO Configuration Control Detection of Azalia [Enabled] the Azalia device.
ICEROCK3-T10 Tablet PC Camera Function (Back, CAMERA1) [Enabled] Use the Camera Function (Back, CAMERA1) option to enable or disable the camera function on the rear panel. Rear camera function disabled Disabled Rear camera function enabled Enabled EFAULT ...
ICEROCK3-T10 Tablet PC 3G Radio Function [Enabled] Use the 3G Radio Function option to enable or disable the 3G function. 3G function disabled Disabled 3G function enabled Enabled EFAULT WIFI Radio Function [Enabled] Use the WIFI Radio Function option to enable or disable the Wi-Fi function. ...
ICEROCK3-T10 Tablet PC 5.4.2 System Agent (SA) Configuration Use the System Agent (SA) Configuration menu (BIOS Menu 16) to configure the System Agent (SA) parameters. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Chipset VT-d [Disabled] Check to enable VT-d >...
ICEROCK3-T10 Tablet PC 5.4.2.1 Graphics Configuration Use the Graphics Configuration menu ( B IOS Menu 17) to configure the graphics settings Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Chipset Graphics Configuration Select which of IGFX/PEG/PCI Graphics Primary Display [Auto] device should be Primary DVMT Pre-Allocated...
Page 84
ICEROCK3-T10 Tablet PC 128M 256M EFAULT 512M DVMT Total Gfx Mem [MAX] Use the DVMT Total Gfx Mem option to specify the maximum amount of memory that can be allocated for the internal graphics device. Configuration options are listed below. 128M ...
ICEROCK3-T10 Tablet PC 5.4.2.2 Memory Configuration Use the Memory Configuration menu (BIOS Menu 18) to display the memory information. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Chipset Memory Information Memory Frequency 1333 Mhz Total Memory 8192 MB (DDR3) --------------------- : Select Screen ...
Page 86
ICEROCK3-T10 Tablet PC Bootup NumLock State [On] Use the Bootup NumLock State BIOS option to specify if the number lock setting must be modified during boot up. Allows the Number Lock on the keyboard to be EFAULT enabled automatically when the computer system boots up.
ICEROCK3-T10 Tablet PC UEFI Boot [Disabled] Use the UEFI Boot option to enable or disable to boot from the UEFI devices. Boot from UEFI devices is enabled. Enabled Boot from UEFI devices is disabled. Disabled EFAULT Boot Option #1 [SATA PM: MRMAJ5A03…] Use the Boot Option #1 option to specify the boot priority from the available devices.
ICEROCK3-T10 Tablet PC Administrator Password Use the Administrator Password to set or change a administrator password. User Password Use the User Password to set or change a user password. 5.7 Exit Use the Exit menu ( B IOS Menu 21) to load default BIOS values, optimal failsafe values 5 8 4 and to save configuration changes.
ICEROCK3-T10 Tablet PC Restore Defaults Use the Restore Defaults option to load the optimal default values for each of the parameters on the Setup menus. F3 key can be used for this operation. Save as User Defaults Use the Save as User Defaults option to save the changes done so far as user defaults. ...
ICEROCK3-T10 Tablet PC 6.1 System Maintenance Introduction If the components of the ITCW1010 fail they must be replaced, such as the wireless LAN module or the motherboard. Please contact the system reseller or vendor to purchase the replacement parts. 6.2 Motherboard Replacement In the case of motherboard failure, please contact an iTech sales representative, reseller or system vendor.
Do not apply voltage levels that exceed the specified voltage range. Doing so may cause fire and/or an electrical shock. Electric shocks can occur if the ITCW1010 chassis is opened when the ITCW1010 is running. Do not drop or insert any objects into the ventilation openings of the ITCW1010.
Electrostatic discharge (ESD) can cause serious damage to electronic components, including the ITCW1010. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the ITCW1010 is opened and any of the electrical components are handled, the following anti-static precautions are strictly adhered to.
Please follow the national guidelines for electrical and electronic product disposal. A.2 Maintenance and Cleaning Precautions When maintaining or cleaning the ITCW1010, please follow the guidelines below. A.2.1 Maintenance and Cleaning Prior to cleaning any part or component of the ITCW1010, please read the details below. Page 86...
ICEROCK3-T10 Tablet PC Except for the LCD panel, never spray or squirt liquids directly onto any other components. To clean the LCD panel, gently wipe it with a piece of soft dry cloth or a slightly moistened cloth. The interior does not require cleaning. Keep fluids away from the interior. ...
ICEROCK3-T10 Tablet PC Appendix BIOS Options Page 88...
Page 99
ICEROCK3-T10 Tablet PC Below is a list of BIOS configuration options in the BIOS chapter. System Date [xx/xx/xx] ......................53 System Time [xx:xx:xx] .......................53 ACPI Sleep State [S3 only (Suspend to RAM)] ..............55 Wake System with Fixed Time [Disabled] .................56 ...
Page 100
ICEROCK3-T10 Tablet PC Primary IGFX Boot Display [VBIOS Default] ..............74 Bootup NumLock State [On]....................76 Quiet Boot [Enabled] ......................76 Option ROM Messages [Force BIOS].................76 UEFI Boot [Disabled] ......................77 Boot Option #1 [SATA PM: MRMAJ5A03…]..............77 Hard Drive BBS Priorities....................77 ...
ICEROCK3-T10 Tablet PC Appendix Terminology Page 91...
Page 102
ICEROCK3-T10 Tablet PC Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® AC ’97 in 1997. Advanced Configuration and Power Interface (ACPI) is an OS-directed ACPI configuration, power management, and thermal management interface. Advanced Host Controller Interface (AHCI) is a SATA Host controller AHCI register-level interface.
Page 103
ICEROCK3-T10 Tablet PC Direct Memory Access (DMA) enables some peripheral devices to bypass the system processor and communicate directly with the system memory. Dual Inline Memory Modules are a type of RAM that offer a 64-bit data DIMM bus and have separate electrical contacts on each side of the module. The digital inputs and digital outputs are general control signals that control the on/off circuit of external devices or TTL devices.
Page 104
ICEROCK3-T10 Tablet PC Liquid crystal display (LCD) is a flat, low-power display device that consists of two polarizing plates with a liquid crystal panel in between. Low-voltage differential signaling (LVDS) is a dual-wire, high-speed LVDS differential electrical signaling system commonly used to connect LCD displays to a computer.
ICEROCK3-T10 Tablet PC Appendix Watchdog Timer Page 95...
Page 106
ICEROCK3-T10 Tablet PC NOTE: The following discussion applies to DOS environment. iTech support is contacted or the iTech website visited for specific drivers for more sophisticated operating systems, e.g., Windows and Linux. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash.
Page 107
ICEROCK3-T10 Tablet PC NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. Example program: ; INITIAL TIMER PERIOD COUNTER W_LOOP: AX, 6F02H ;setting the time-out value BL, 30 ;time-out value is 48 seconds ;...
ICEROCK3-T10 Tablet PC E.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
Page 110
ICEROCK3-T10 Tablet PC Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl Ethers (CR(VI)) (PBB) (PBDE) Housing Display Printed Circuit Board Metal Fasteners Cable Assembly Fan Assembly Power Supply Assemblies Battery This toxic or hazardous substance is contained in all of the homogeneous materials for the part is...