Printing Without A Power Outlet - Canon SELPHY CP1000 User Manual

Printing without a Power Outlet

To print where no power outlet is available, use Battery Pack NB-CP2L (sold
separately). On a full charge, up to about 36 sheets* of postcard-size paper
can be printed.
* According to Canon testing. May vary depending on printing conditions.
Attaching the Battery Pack
1
Remove the battery pack
mounting cover.
z z With the switch held in the direction of the
ER Y
BA TT
arrow ( ), move the cover in the
direction of the arrow (
Air Vent
2
Remove the battery terminal
cover.
3
Attach the battery pack.
z z Slide the terminal-end in the direction of
the arrow ( ) and insert the other end
(
) to remove.
) until it clicks into place.
Charging the Battery to Use SELPHY
• Once SELPHY is connected to a power outlet
and [ ] blinks on the screen.
• When charging is finished in about four hours (at room temperature),
[ ] will no longer be displayed.
• SELPHY can be turned on for use even while [
However, charging will then stop. When power is turned off, [
and charging resumes.
• For battery precautions, refer to the battery user manual.
• When [ ] is displayed, place SELPHY in an environment at operating
temperature (= 44), and charge once it has adjusted to the ambient
temperature.
• When [ ] is displayed, press and hold any button other than <q> for
3 seconds or more to clear [
you can press any button other than <q>, and [
10 seconds.
• When [ ] is displayed in red, the battery has reached the end of its life.
Please purchase a new battery.
(= 12), charging starts
] is blinking (= 12).
] blinks
]. To check if the battery is still charging,
] will appear for around
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB Cable
Troubleshooting
Appendix
43