To display the ID Photo Settings screen by default when a memory card is inserted, and after printing,
press the <k> button, choose [Change Settings] [ID Photo Priority], and then select [On].
The photo may not be accepted as an official ID photo, depending on the intended purpose. For
details, contact the institution that requires the photo.
Printing with Different Settings
Images can be printed with a print finish, with or without borders, with different page layouts,
and after correcting the images.
Press the <k> button and select [Change Settings].
In [Keep Print Settings], you can have SELPHY retain the [Borders] and [Page
Printing without a Power Outlet
To print where no power outlet is available, use Battery Pack NB-CP2L (sold separately).
Attaching the Battery Pack
T E R
B A T
Remove the battery pack mounting cover.
With the switch held in the direction of the arrow (
), move the cover in the direction of the arrow ( ) to
Remove the battery terminal cover.
Attach the battery pack.
Slide the terminal-end in the direction of the arrow ( )
and insert the other end ( ) until it clicks into place.
Various Printing Options