Print only selected areas of an image as follows.
Access the cropping screen.
Choose an image as described in step 4
of "Printing Images"
EDIT button, and then press the <o>
A crop frame is displayed, showing the
image area that will be cropped.
Adjust the image area to crop.
To switch the crop frame between portrait
and landscape orientation, press the
To move the crop frame, press the
To enlarge the crop frame, press the
<-> button, and to reduce it, press the
15), press the
Confirm the setting.
To confirm the cropping area and return
to the image display screen, press the
To crop other images for printing with the
first one, repeat steps 1 – 3.
Print as described in step 6 of "Printing
After printing, crop settings are cleared.
To adjust the cropping area once you have set it, press the EDIT button on the
image display screen, press the <u><d> buttons to select [Adjust Cropping],
and then press the <o
button. Repeat steps 2 – 3.
To cancel cropping after you have set the cropping area, press the EDIT button
on the image display screen, press the <u><d> buttons to select [Reset
Cropping], press the <o> button to access the reset cropping screen, and
then press the <o> button again.
Cropping areas you have set are cleared if you turn off SELPHY or remove the
memory card before printing.
You can specify cropping for up to 99 images at once.
Cropping is not available when printing with [Print All Images] or [DPOF Print]
or when [Page Layout]
27) is set to [
The cropping aspect ratio indicated by the frame displayed on images cannot
To change the number of prints, press the <u><d> buttons on the image
display screen in step 3. Note that specifying zero prints will not clear cropping
Index] or [
Printing via USB Cable