Printing ID Photos
Images can be printed for use in photo identification. Choose from the
following three sizes.
Specify the length of the long and short sides, and then print.
Print a photo that complies with the international ICAO standard.
Print two sizes: 50x50 mm (approx. 2.0x2.0 in.) and 45x35 mm
(approx. 1.8x1.4 in.).
With [Custom] and [Standard], two different images can be printed on
The photo may not be accepted as an official ID photo, depending on
the intended purpose. For details, contact the institution that requires the
Specify ID photo printing.
Press the <k> button.
Press the <u><d> buttons to select [ID
Photo], and then press the <o> button.
Specify the finished size of the
Press the <l><r> buttons to specify
how the size is determined.
[Custom]: Press the <u><d> buttons
to select [Long Side], and then press the
<l><r> buttons to specify the length.
Specify the [Short Side] length, and then
press the <o> button again. Note
that options available for [Short Side]
are automatically updated based on the
[Long Side] length.
[Standard] or [Dual]: Check the indicated
image size and press the <o> button.
Choose an image to print.
Press the <l><r> buttons to select an
image, and then press the <u> button.
is shown in the lower right (up to two
images with [Custom] and [Standard],
only one image with [Dual]).
To specify the cropping area
press the EDIT button.
Print as described in step 6 of "Printing
Settings are cleared after printing.
Printing via USB Cable