Attaching The Dust Protection Covers - Canon SELPHY CP1000 User Manual

Attaching the Dust Protection Covers

Attaching the dust protection covers will help keep paper clean and free of
dust. Note that dust protection covers are not included in some regions.
Attaching and Removing the Back Cover
z z Insert the back dust protection cover as
shown, by aligning with the  marks
behind the printer.
z z To remove, first lift it upwards to release
the tabs, and then pull it towards you.
Attaching and Removing the Front Cover
z z Insert the tab of the front dust protection
cover as shown.
z z To remove, pull it towards you.
• It may not be possible to keep paper free of dust outdoors or in
dusty environments. Be careful about where you use the printer.
• Store the dust protection covers in a bag or other container to keep them free
of dust.
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB Cable
Troubleshooting
Appendix
11