Power; Screen; Printing; Printing Cover - Canon SELPHY CP1000 User Manual

Compact photo printer
Hide thumbs Also See for SELPHY CP1000:
Table of Contents

Advertisement

Power

Cannot turn on SELPHY
Confirm that the power cord is connected and plugged in correctly
Hold the <q> button until the startup screen is displayed
When using Battery Pack NB-CP2L (sold separately), confirm that the battery pack is
charged and inserted correctly, and that the cable is connected correctly.

Screen

The image display screen is not displayed
While the ID Photo Settings screen is displayed, press <k> to display the menu,
press <u><d> to choose [Select & Print], and then press <o>.
(=
12).
(=
13).
(=
32)

Printing

Cannot print
Confirm that SELPHY is on
(=
13).
Confirm that the paper and ink cassettes are loaded correctly
Confirm that the ink sheet is not loose
(=
Confirm that you are using paper designed especially for SELPHY
Replace the ink cassette and refill the paper cassette as needed
Confirm that you are using the correct combination of paper, paper cassette, and ink
cassette
(=
8).
SELPHY will temporarily halt printing if it exceeds a specific temperature; this does
not indicate a problem. Wait until the printer cools off. During continuous printing, in
hot environments, or if the printer's interior becomes hot because the rear-side air
vent
(=
5) is blocked, SELPHY may temporarily stop printing, causing printing to
take longer.
Cannot display or print images on memory cards or USB flash drives
Confirm that the memory card is fully inserted in the correct slot, with the label face-
up
(=
14, 15).
Confirm that the USB flash drive is fully inserted, right-side up
Confirm that the image format is supported
Confirm that a memory card requiring the use of an adapter has not been inserted
without its adapter
(=
14).
Cannot print from a camera
Confirm that your camera supports PictBridge
Confirm that SELPHY and the camera are connected correctly
Confirm that your camera batteries have enough charge left. If the batteries are
depleted, replace them with fully charged or new ones.
Remove any inserted memory cards or USB flash drives.
(=
10).
8).
(=
10).
(=
16).
(=
17).
(=
14).
(=
36).
(=
36).
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB Cable
Troubleshooting
Appendix
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents