Connecting The Power; Attaching The Dust Protection Covers - Canon SELPHY CP1000 Getting Started

Initial Preparations

Connecting the Power

ER Y
B A TT

Attaching the Dust Protection Covers

Attaching the dust protection covers will help keep paper clean and free of dust. Note that
dust protection covers are not included in some regions.
•
It may not be possible to keep paper free of dust outdoors or in dusty environments.
Be careful about where you use the printer.
8
1
Plug the adapter cord into SELPHY.
z z
Insert the adapter plug fully into the power inlet on
SELPHY.
2
Connect the power cord.
z z
Connect the power cord to the compact power adapter,
and then plug the other end into a power outlet.
Attaching and Removing the Back Cover
z z
Insert the back dust protection cover as shown to attach it.
z z
Insert the cover fully, leaving no gaps between it and the
printer.
z z
To remove, first lift it upwards to release the tabs, and
then pull it towards you.
Attaching and Removing the Front Cover
z z
Insert the tab of the front dust protection cover as shown.
z z
To remove, pull it towards you.