Table of Contents
Advertisement
3.6.4.1 Boot settings configuration
Use Boot Settings Configuration menu to configure advanced boot options.
Item
Quick Boot [Enabled]
Quiet Boot [Disabled]
AddOn ROM Display Mode
[Force BIOS]
Bootup Num-Lock [On]
PS/2 Mouse support [Auto]
Wait For "F1" If Error
[Enabled]
Hit "DEL" Message Display
[Enabled]
Interrupt 19 capture
[Disabled]
Options
Disabled,
Enabled (
)
D
EFAULT
Disabled (
)
D
EFAULT
Enabled
Force BIOS (
)
D
EFAULT
Keep Current
On (
)
D
EFAULT
Off
Auto (
)
D
EFAULT
Disabled,
Enabled
Disabled,
Enabled (
)
D
EFAULT
Disabled,
Enabled (
)
D
EFAULT
Disabled (
)
D
EFAULT
Enabled
Data Modul AG - www.data-modul.com
Description
This item allows BIOS to skip certain tests
while booting. This will decrease the time
needed to boot the system.
If set to Disabled, the BIOS displays normal
POST messages. If Enabled, an OEM Logo is
shown instead of POST messages.
This option allows add-on ROM (read-only
memory) messages to be displayed.
This option allows the number Lock setting to
be modified during boot up.
This interface utilizes a bidirectional serial
protocol to communicate with the computer's
auxiliary device controller
When set to enable, the system waits for the
F1 key to be pressed when error occurs.
This BIOS feature allows you to control the
display of the Hit "DEL" to enter setup
message during memory initialization.
This item allows options for ROMs to trap
interrupt 19.
XTX-PNV User's Manual 51
User's Manual
Advertisement
Table of Contents
