Setting Jumpers & Connectors; At/Atx Mode/ At/Atx Power Selection (Sw1); Signal Description -At/Atx Mode/ At/Atx Power Selection - Avalue Technology XTX-PNV User Manual

XTX-PNV
2.4 Setting Jumpers & Connectors
2.4.1

AT/ATX mode/ AT/ATX power selection (SW1)

*Default
2.4.1.1 Signal Description –AT/ATX mode/ AT/ATX power selection
AT/ATX power / AT/ATX mode
AT mode/ AT power
AT mode/ ATX power
ATX mode/ AT power
ATX mode/ ATX power
20 XTX-PNV User's Manual
Use ATX power input, and set the board in ATX
Data Modul AG - www.data-modul.com
AT/ATX Power
AT power
1
OFF
2
ATX power*
1
OFF
2
AT/ATX mode
AT mode
1
OFF
2
ATX mode*
1
OFF
2
Description
Use AT power input, and set the board in AT
mode.
Use ATX power input, and set the board in AT
mode.
Use AT power input, and set the board in ATX
mode.
mode.
ON
ON
ON
ON