Duplex Option - Kyocera KM-3050 Operation Manual

Collate/Offset Copying
OPERATION GUIDE
1
Press [Layout/Edit]
and then [Duplex].
2
Select the desired

Duplex option.

3
If you choose [2-sided>>2-sided], [2-sided>>1-sided], [Book>>1-sided] or
[Book>>2-sided], select the binding edge of the originals of Original.
4
If you choose [1-sided>>2-sided], [2-sided>>2-sided] or [Book>>2-sided],
select the binding edge of the finished copies of Finishing.
5
Press [Original Orientation] to select orientation of the originals, either [Top
Edge Top] or [Top Edge Left]. Then press [OK].
6
Press [OK].
7
Place the original and press the Start key.
Once an original placed on the platen is scanned, replace it with the next
one. Then, press the Start key.
After scanning all originals, press [Scan Finish] to start copying.
The machine can collate and offset at the same time as it copies.
You can use the Collate/Offset copy function for tasks such as those
shown below.
Ready to copy.
Copy Image
Zoom
Set Original.
Booklet
Original : - - -
Zoom : 100%
Page #
- - -
Paper :
Preview
Quick Setup Org./Paper/
Finishing
Status
Ready to copy.
Duplex
1-sided
>>1-sided
1-sided
Press [OK] to display
>>2-sided
the image.
2-sided
>>1-sided
2-sided
>>2-sided
Book
>>1-sided
Book
>>2-sided
Add Shortcut
Status
Basic Operation
Copies
Combine Margin/ Border Erase
Centering
Duplex Cover Form
Overlay
Memo Page
Image Layout/Edit Advanced
Quality Setup
10/5/2006
Copies
Finishing
Top Edge Top
Binding Binding
Left/Right Top Original
Orientation
Cancel OK
10/5/2006
3-17
1
10:10
1
10:10