Kyocera KM-3050 Operation Manual page 171

OPERATION GUIDE
15
As shown in the figure, clean
dirt from the separator by
moving the brush from side to
side along the separator.
16
As shown in the figure, clean
dirt from the transfer roller by
moving the brush from side to
side along the roller while
rotating the roller by turning
the gear at the left end of the
roller.
17
Put away the cleaning brush
after the cleaning. Close the
front cover and left cover 1 by
pressing specified part.
18
Open the Multi Purpose Tray and remove the filters F1 and F2.
Maintenance
F1
F2
5-11