Kyocera KM-3050 Operation Manual page 113

OPERATION GUIDE
Data to be entered are as follows.
Item
Host Host name or IP address of the PC to
Name* receive the data.
Path Path to the receiving folder such as
follows.
For example, \User\ScanData.
Login User User name to access the PC
Name For example, abcdnet\james.smith
Login Password to access the PC
Password
* To specify a port number different from the default (139), enter using
the format "host name : port number" (e.g., FTPhostname:140).
6
Upon completion of
all entries, press
[Connection Test] to
check the
connection.
NOTE:
Connected appears when connection to the destination is
correctly established. If Cannot connect appears, review the entry.
To specify another destination, go to the step 7. To specify only one
destination, go to step 8.
7
Press [Next Dest.] and repeat steps 4 to 6 to specify the destination. You
can specify a combined total of up to 10 FTP and SMB destination folders.
NOTE:
When [Add to Addr Book] is displayed, the entry is registered in
the Address Book.
8
Press [OK] to register the entry in the destination list.
9
Check the destination list.
Select a destination and press [Detail/Edit] to check and edit it. Edit it, if
necessary, referring to steps 4 to 6.
Data to be entered
Ready to send.
Place original.
Folder Path Entry
SMB Host Name
FTP Path
Login
User Name
Login
Password
Add to Addr Book Next Dest.
Status
Basic Operation
Max.
characters
Up to 62
characters
Up to 126
characters
Up to 62
characters
Up to 62
characters
Destination
1
Connection
Test
Cancel OK
10/5/2006 10:10
3-29