Kyocera KM-3050 Operation Manual page 60

Preparation before Use
Item
LDAP
LDAP Server Name
LDAP Port Number
Search Timeout
Login User Name
Login Password
Max Search Results
Search Base
Display Mode
2-26
2
In COMMAND CENTER, click Advanced -> Management > LDAP.
3
Enter the correct settings in each field.
The settings to be specified in the LDAP settings screen are shown below.
Enables or disables access to the LDAP server.
Enter the LDAP server IP address or name. The maximum length of the LDAP
server name is 62 characters.
Enter the port number used by the LDAP server. Normally, 389 is used.
Enter the duration of LDAP server searches. You can enter any number between
5 and 60.
Enter the user name used for LDAP logon. The maximum length of the login user
name is 62 characters.
Enter the password used for LDAP logon. The maximum length of the login
password is 62 characters.
Enter the maximum number of results displayed when the LDAP address book is
searched. You can enter any number between 4 and 30.
Specify the starting point for LDAP directory searches.
Selects the default display mode from Display from the first name and Display
from the family name.
4
Click Submit.
Description
OPERATION GUIDE