How To Use The Usb To Serial Conversion Cable - SunStar SSP-WE/3.5 Instruction Manual

How to use the USB to Serial conversion cable

Before using the USB to Serial conversion cable, install the driver saved in the
provided CD in the user's computer.
Reboot the computer after the installation is completed.
Connect the cable to the USB port after rebooting. Then, the computer will
automatically recognize the USB connection.
After the connection is properly made, set up a virtually created COM port,
following the setup procedures.
As the figure below shows, select "My Computer."
When the My Computer window is open, press "System Information Display"
on the top left. Select and open the system information from "My Computer."
143