SunStar SSP-WE/3.5 Instruction Manual page 30

30
· · Machine Tool
This includes mechanical control commands: Second Origin Code for a user to position the
second origin except the first origin, Machine Stop Code to temporarily stop the machine by
inputting a stop code at any position, Trimming Code to input the thread trimming function at
any position of the created sewing data, Machine Delete Code to delete the mechanical
input function codes, and Trimming All Code to automatically add the thread trimming code
to the last part of each sewing data.
Second Origin Control
Command
Machine Stop Control
Command
Thread Trimming
Command
Clamp Inversion
Command
Mechanical Control
Command Deletrion
All Thread Trimming
Command
Output Port Control
Command
Input Port Control
Command
Delay Time Control
Command
Head Up/Down Control
Command
Pressure Foot Control
Command
Clamp Motor Control
Command
Input the second origin code to any position
of the sewing range.
Input the machine stop code to any position
of the selected sewing data.
Input the thread trimming code to any
position of the selected sewing data.
Input the inversion/non-inversion codes to
the selected sewing data.
Delete the mechanical code at the selected
sewing data.
Input the thread trimming code at all
selected sewing data.
Input the output port code from the selected
sewing data.
Input the input port code from the selected
sewing data.
Input the delay time code from the selected
sewing data.
Input the head up/down code from the
selected sewing data.
Input the pressure foot control command into
selected sewing data.
Input the clamp motor control command into
the selected sewing data