Min-Max. Sewing Range; Measurement(Point To Point) - SunStar SSP-WE/3.5 Instruction Manual

■ ■ Min-Max. Sewing Range
Display the max-min range of sewing data in the edit range.
① Sewing data should exist in the edit range.
② Select Min/Max Sewing Range on the upper
of the menu.
③ Min-Max Range Dialog is displayed. You can
easily find the max-min range of sewing data
through the range dialog.
■ ■ Measurement (Point to Point)
Measure the distance between two stitch points.
① Select "Measure"on the upper of the menu, or

"Measurement(Point to Point)

Measure tool bar. The selected button gets conc-
aved.
② Select the first sewing data joint to measure with
the mouse' s left button. The selected joint shows
in a dark circle as shown in the figure.
③ Continuously select the second joint. It also shows
in a dark circle as shown in the figure.
④ If the figure above is displayed, click the mouse' s
right button. The selected dark circle disappears,
and the measured value between two stitches is
displayed on the Stitch Length in the upper-right
of Information Tool Bar.
"on the
97