Variable
<cost>
enable
disable
weight <cost>
Enabling remote access
You can enable remote access for telnet, SSH (on SSH software images), SNMP, and webpage
access.
For more information, see Using ACLI and EDM on Avaya Ethernet Routing Switch 4000 Series,
NN47205-102 and Configuring Systems on Avaya Ethernet Routing Switch 4000, NN47205-500.
About this task
Use the following procedure to enable and configure remote access to the management features of
the Avaya Ethernet Routing Switch 4000.
Procedure
1. Enter Global Configuration mode:
enable
configure terminal
2. To enable telnet remote access, enter the following command:
telnet-access enable
3. To enable SSH remote access, enter the following command:
ssh
4. To enable SNMP remote access, enter the following command:
snmp-server enable
5. To enable webpage remote access, enter the following command:
web-server enable
Example
The following is an example of enabling telnet remote access:
4850GTS-PWR+>enable
4850GTS-PWR+#configure terminal
Enter configuration commands, one per line.
June 2014
Definition
Specify the weight, or cost, of the route being added.
Range is 1 to 65535.
Enable the specified static route.
Disable the specified static route.
Change the weight, or cost, of an existing static
route. Range is 1 to 65535.
End with CNTL/Z.
Quick Start Configuration for Avaya ERS 4000 Series
Comments? infodev@avaya.com
Enabling remote access
35