Camus Hydronics DFH/W500 Installation, Operation And Service Manual page 34

DFH
Modulation: Boiler Inlet, Boiler Fixed Setpoint Operation (Standalone)
Description
•
Boiler operates at a fixed
setpoint
•
Modulates on boiler inlet
sensor (default)
•
Heat demand is generated
when Remote Operator is
closed.
29
Electrical Connection(s) Programming Instructions
1) Press
and
2) Press [CH – Central Heat Configuration]
3) Press the to arrive at Setpoint
4) Select Setpoint source: Local
5) Enter desired Setpoint
6) Place toggle switch to REMOTE for remote enable operation (if required)