Camus Hydronics DMH 081 Installation, Operation And Service Manual
  1. Manuals
  2. Brands
  3. Camus Hydronics Manuals
  4. Boiler
  5. DynaMax DMH081
  6. Installation, operation and service manual

Camus Hydronics DMH 081 Installation, Operation And Service Manual

Dynamax series gas fired wall hung & floor mount residential commercial stainless steel boilers
Hide thumbs Also See for DMH 081:
Table of Contents

Advertisement

Quick Links

See also: Installation, Operation and Service Manual
INSTALLATION OPERATION
AND SERVICE MANUAL
GAS FIRED WALL HUNG & FLOOR MOUNT RESIDENTIAL
COMBINATION HEATING/HOT WATER SUPPLY
W
W
If the information in these instructions is not followed
exactly, a fire or explosion may result causing property
damage, personal injury or death
Do not store or use gasoline or other flammable
vapours and liquids in the vicinity of this or any
other appliance.
WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance,
o
Do not touch any electrical switch; do not
o
use any phone in your building,
Immediately call your gas supplier from a
o
neighbour's phone. Follow the gas
supplier's instructions,
If you cannot reach your gas supplier, call
o
the fire department.
Qualified installer, service agency or the
gas supplier must perform installation and
service.
To the Installer: After installation, these instructions
must be given to the end user or left on or near the
appliance.
To the End User: This booklet contains important
information about this appliance. Retain for future
reference.
CAMUS
6226 Netherhart Road, Mississauga, Ontario, L5T 1B7
COMMERCIAL STAINLESS STEEL BOILERS
DynaMax SERIES
HYDRONIC HEATING
Models; DMH081, 101, 151, 201, 251,
211, 261, 291, 391, 501, 601, 751
HOT WATER SUPPLY
Models; DMW082 ,102, 152, 202, 252,
212, 262, 292, 392, 502, 602, 752
Models; DMC083, 103, 153, 203, 253,
213, 263, 293, 393, 503, 603, 753
A
A
R
R
N
N
I
I
N
N
G
G
:
:
HYDRONICS
LTD.
99-0056
Rev. 01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DMH 081 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Camus Hydronics DMH 081

Summary of Contents for Camus Hydronics DMH 081

  • Page 1 INSTALLATION OPERATION AND SERVICE MANUAL GAS FIRED WALL HUNG & FLOOR MOUNT RESIDENTIAL COMMERCIAL STAINLESS STEEL BOILERS DynaMax SERIES HYDRONIC HEATING Models; DMH081, 101, 151, 201, 251, 211, 261, 291, 391, 501, 601, 751 HOT WATER SUPPLY Models; DMW082 ,102, 152, 202, 252, 212, 262, 292, 392, 502, 602, 752 COMBINATION HEATING/HOT WATER SUPPLY Models;...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS PART 1 GENERAL INFORMATION....................1 INTRODUCTION ......................... 1 SPECIAL INSTRUCTIONS TO OWNER ................... 1 CHECKING EQUIPMENT......................1 DISPLAY UNIT ..........................1 SEQUENCE OF OPERATION..................... 1 1.5.2 Heat Transfer Process ......................2 1.5.3 End of Sequence ........................2 INSTALLATION CODES ......................
  • Page 3 ELECTRICAL CONECTIONS....................18 HIGH LIMIT ..........................18 DYNAMAX CONTROLLER ..................... 18 5.3.1 SERVICE PARTS ....................... 18 5.3.2 IGNITION MODULE LOCKOUT FUNCTIONS.............. 18 ERROR TABLE .......................... 18 5.4.1 Hard Lockout ‘A’ Codes...................... 19 5.4.2 Soft Lockout ‘E’ Codes ....................... 19 PART 6 CONTROL PANEL.........................
  • Page 4 11.4.1 Condensate Volume ......................46 11.5 IGNITER AND FLAME SENSOR ELECTRODES ..............46 11.6 CHECK IGNITER GROUND WIRING ..................46 11.7 BURNER MAINTENANCE ....................... 46 11.7.1 Burner Removal and Cleaning..................... 46 11.8 COMBUSTION AND VENTILATION AIR................47 11.9 CONTROL CIRCUIT VOLTAGE....................47 11.10 COMBUSTIBLE MATERIALS ....................

  • Page 5: Part 1 General Information

    DynaMax Controller will allow the performed only by a qualified installer/technician that is gas valve to remain open. The burner is now firing at trained by Camus Hydronics. The serviceman must utilize a starting input rate. combustion analyzer with CO...

  • Page 6: Heat Transfer Process

    Table 1: DynaMax Ignition Cycle (in LabVision) IMPORTANT Consult and follow local Building and Fire Regulations and other Safety Codes that apply to this installation. Contact the local gas utility company to inspect and authorize all gas and flue connections. Installation and service must be performed by a qualified technician/installer, and trained by Camus Hydronics.

  • Page 7: Warranty

    • WARRANTY Any improper operation of the common venting system should be corrected so that the installation • Factory warranty (shipped with unit) does not conforms to the National Fuel Gas Code, ANSI apply to units improperly installed or improperly Z223.1 and/or CAN/CGA B149, Installation Codes.

  • Page 8: Location Of Unit

    1.10 LOCATION OF UNIT 1.11 CLEARANCE FROM COMBUSTIBLE MATERIAL Install this appliance in a clean, dry location with adequate service clearance. This appliance is suitable for alcove (a closet without a door) installation with minimum clearances to combustibles • Do not locate this appliance in an area where it will be as follows: subject to freezing unless precautions are taken.
  • Page 9 Table 3: DynaMax Wall Hung Service Clearances Service Clearance, Inches (cm) Input [BTU/hr] Front Right Side Left Side Rear 80,000 24” (61cm) 0” (0 cm) 0” (0 cm) 0” (0 cm) 0” (0 cm) 100,000 24” (61cm) 0” (0 cm) 0”...
  • Page 10 Table 5: DynaMax Floor Mount Service Clearances Service Clearance, Inches (cm) Input [BTU/hr] Front Right Side Left Side Rear 200,000 12” (31cm) 24” (61cm) 0” (0cm) 12” (31cm) 14” (36 cm) 250,000 12” (31cm) 24” (61cm) 0” (0cm) 12” (31cm) 14”...
  • Page 11 Figure 5: DynaMax Wall Hung Service Clearances Figure 6: DynaMax Floor Mount Service Clearances...

  • Page 12: Part 2 Air Inlet And Venting

    • PART 2 AIR INLET AND VENTING Vent connectors serving appliances vented by natural draft shall not be connected into any portion of a mechanical draft system operating under positive pressure. It is extremely important to follow these venting • Horizontal runs of vent pipe shall be securely instructions carefully.

  • Page 13: Approved Venting Materials Category Iv

    2.2.1 Approved Venting Materials Category IV The DynaMax Floor Mount boiler may be vented as a Category II appliance using sealed vent suitable for a PVC and CPVC (Chlorinated Polyvinyl Chloride) condensing appliance. Schedule 40 or 80 approved to ULC S636. 2.3.1 Approved Venting Materials Category II Manufactured prefabricated UL/ULC listed vent of AL29-...

  • Page 14: Vent Termination And Air Inlet Clearances

    2.5 VENT TERMINATION AND AIR INLET The vent terminal shall not be installed closer than 3 feet (1m) from an inside corner of an L-shaped CLEARANCES structure, window well, stairwell, alcove, courtyard 2.5.1 Sidewall Venting or other recessed area as wind eddies could affect boiler performance or cause recirculation.

  • Page 15: Vertical Direct Venting

    Locate terminations so they are not likely to be Perform regularly scheduled inspections to ensure damaged by foreign objects, or exposed to build-up that the air inlet terminal is unobstructed. of debris. Figure 11: Vertical Direct Venting Configuration Perform regularly scheduled inspections to ensure that the air inlet terminal is unobstructed.

  • Page 16: Part 3 Gas Connection

    The appliance and its individual gas shut-off valve must be PART 3 GAS CONNECTION disconnected from the supply piping when pressure testing the gas supply piping at pressures above ½ PSI Verify that the appliance is supplied with the type of gas specified on the rating plate.

  • Page 17: Air/Gas Ratio Valve

    Figure 14: DynaMax 500 – 750 1:1 Air/Gas Ratio Control IMPORTANT Valve Upon completion of initial installation or following any repair work on the gas system, leak test all gas connections with a soap solution while the main burner is firing. Immediately repair any leak found in the gas train or related components.

  • Page 18: Part 4 Water Connection

    WARNING REGARDING CHILLED WATER PART 4 WATER CONNECTION SYSTEMS • Check all applicable local heating, plumbing and When an appliance is connected to an air conditioning building safety codes before proceeding. system where the same water is used for heating and •...

  • Page 19: Heat Exchanger

    HEAT EXCHANGER An instantaneous water heater is designed to deliver hot water without the use of a storage tank. It is suitable for This appliance uses precision formed stainless steel tubing applications with variable load such as restaurants, to maximize the heat transfer process and achieve 97% condominiums, apartments and motels and typically used in steady-state efficiency.

  • Page 21: Flow Proving Device (Wall Mount Models Only)

    4.11 RELIEF VALVE FLOW PROVING DEVICE (wall mount This appliance is supplied with a relief valve sized in models only) accordance with ASME Boiler and Pressure Vessel Code, Figure 17: Flow Proving Device Section IV (“Heating Boilers”). This component is shipped loose.

  • Page 22: Part 5 Electrical & Controls

    Table 14: Connector Description PART 5 ELECTRICAL & CONTROLS Connector Connector Description Provides 120V to the DynaMax Controller IT IS EXTREMELY IMPORTANT THAT THIS UNIT BE 3-Way Diverter Valve PROPERLY GROUNDED! On-Board Pump ELECTRICAL CONECTIONS High-Limit, Gas Valve, Flame Sensor Minimum 120VAC 60Hz single phase (15A circuit) is Fan Power, Fan Modulation required for the DynaMax models DM-080 through DM-750.

  • Page 23: Hard Lockout 'A' Codes

    5.4.1 Hard Lockout ‘A’ Codes 5.4.2 Soft Lockout ‘E’ Codes Table 15: Lockout Codes Table 16: Blocking Codes ‘A’ Error Description ‘E’ Error Description code code Three unsuccessful Supply sensor not T_SUPPLY_OPEN IGNIT_ERROR ignition attempts in a connected Inlet sensor not T_INLET_OPEN Three times flame connected...

  • Page 24: Part 6 Control Panel

    Mode 1: Central Heating with Outdoor Reset and Thermostat PART 6 CONTROL PANEL Control DYNAMAX CONTROLLER This mode will only function when an outdoor sensor is connected. The setpoint is calculated depending on the The appliance is provided with a operator interface panel at outdoor temperature and the burner will react on the room the front.

  • Page 25: Domestic Hot Water Modes

    Mode 3: Central Heating with Constant Temperature Loop Mode 4: Combination Boiler using Plate Heat Exchanger and DHW Temperature Sensor No outdoor sensor is needed. The supply temperature is kept constantly at the setpoint temperature. The burner is In this configuration the boiler can be used for space heating controlled in a similar way as Mode 0.

  • Page 26: Part 7 Components

    7.3 COMBUSTION AIR FAN PART 7 COMPONENTS DynaMax uses a modulating air fan to provide combustible DIRECT SPARK IGNITER air/gas mix to the burner and push the products of combustion through the heat exchanger and venting system. The direct spark igniter is inserted directly through the The fan assembly consists of a sealed housing and fan combustion chamber front door and held in place by two torx wheel constructed from spark resistant cast aluminium.

  • Page 27: Part 8 Labvision Software

    • Click on the Communication Tab PART 8 LABVISION SOFTWARE • In the Communication Port pull down menu select the address of Argus Link USB port. NOTE • Click [OK] LabVision software is available on request from the factory • Use the pull down menu to jump to the desired and is not shipped with the boiler/ water heater.

  • Page 28: Labvision Central Heating

    Parameters shown in blue text can be adjusted. To change a LABVISION CENTRAL HEATING blue coloured parameter, place the cursor on top a Use the pull down menu and select Central Heating to adjust parameter and double-click. This will bring up a window to parameters in Central Heating.

  • Page 29: Central Heating Mode, Installer Level

    8.3.2 Central Heating Mode = 1, 2, 3 Installer Level Table 18: CH Input Screen Parameters Figure 34: Central Heating Mode = 1, 2, 3 Settings Parameter Parameter Description Displays the state of the room thermostat. When ‘on’ is shown the CH demand thermostat is closed, when ‘off’...

  • Page 30: Labvision Domestic Hot Water

    LABVISION DOMESTIC HOT WATER The following parameters can be adjusted: Table 21: DHW Mode = 1, 2 Parameters Use the pull down menu and select DHW Mode 4 to adjust parameters. Before the parameters can be adjusted the blue Parameter Parameter Description status bar must track left-to-right and back again.
  • Page 31 Table 22: DHW Mode = 4 Parameters Table 23: Status Readouts Parameter Parameter Description Parameter Parameter Description Keeps the plate heat exchanger To provide a target setpoint for DHW_Setpoint warm. This is accomplished by DHW. (Default: 120 firing the boiler at minimum fire. This process repeats itself with a 2 PRE HEAT minute gap in between firing if the...

  • Page 32: Labvision Cascade

    The following parameters can be adjusted: LABVISION CASCADE Table 24: Cascade Parameters When connected in a cascade setup the Master boiler can control up to 7 slave boilers (ie. a total of 8 boilers) from the Parameter Parameter Description control panel of the Master Boiler. All diagnostic, control operation can be performed on the Master boiler, which can This parameter is entered to then relay the relevant information to the slave boilers.

  • Page 33: Analysis Of Microsoft® Excel Log File

    Figure 45: Adjust Viewing Area Place a checkmark beside ‘Tab’ and ‘Semi-Colon’ from the checkboxes provided. Click Next. In the ‘Column data format’ section of the window, ensure that ‘General’ is selected. Click Finish. An ‘Import Data’ window will appear and check to see that ‘Existing Worksheet’...

  • Page 34: Error History

    Error History LabVision has the ability to record past blocking (E) and lockout (A) errors. To access this feature use the pull down menu and select History. Figure 47: Error History The blocking and lockout errors are separated into their own respective rows and are identified by their respective error codes.

  • Page 35: Part 9 Dynamax Control Panel

    PART 9 DYNAMAX CONTROL PANEL ENTER • • Press to enter Main MENU Press to ENTER to Menu. This provides confirm selection or access to System to confirm a Monitor, Settings, parameter change Programs and Errors PREVIOUS NEXT DOWN RESET NEXT •...

  • Page 36: Introduction To The Dynamax Control Panel

    INTRODUCTION TO THE DYNAMAX Figure 51: DynaMax Home Screen CONTROL PANEL For times when a notebook computer is not available, a service technician will still be able to perform all the functions described in LabVision, except for the logging aspect. The menu structure for the DynaMax Control Panel was The display panel then defaults to the next screen which designed to be intuitive and easy to use for a first time user.

  • Page 37: System Monitor Display

    Appliance Settings Table 29: Central Heating Readout Changes boiler characteristics. The User level will have DISPLAY access to the first screen inside Appliance Settings which DESCRIPTION READOUT allows for changes in Central Heating setpoint. A 4-digit Outdoor Temperature (if personal identification number (PIN) needs to be entered Outd equipped) before moving further into the controller.
  • Page 38 Run Time Display Display Options Display Figure 58: Run Time Figure 60: Display Options Display From SYSTEM display; From MENU display; Use [NEXT] to view RUN TIME display Use [PREVIOUS]/[NEXT] button to select ‘Display Options’. Table 32: Run Time Display Readout Press ENTER DISPLAY Language Display...

  • Page 39: Central Heating Display

    CENTRAL HEATING DISPLAY The correct PIN # must be entered in order to gain access to additional parameters. Figure 64: Programs Screen Figure 67: Central Heating Mode Selection From INSTALLER ACCESS display; From MENU display; Use [UP]/[DOWN] to select mode of operation. A full Use [PREVIOUS]/[NEXT] button to select ‘Central description of each mode is available in 6.3 The Heating’...

  • Page 40: 9.5 Domestic Hot Water Display

    9.5 DOMESTIC HOT WATER DISPLAY Figure 72: Domestic Hot Water Mode Figure 69: Program Selection From INSTALLER ACCESS display; Use [UP]/[DOWN] to select mode of operation. A full description of each mode is available in 6.3. The From MENU display; following parameters can be selected from the Use [PREVIOUS]/[NEXT] to select ‘Domestic Hot installer level.

  • Page 41: 9.6 Cascade Control

    9.6 CASCADE CONTROL Figure 78: Cascade Delay Time From MENU display. Figure 74: Menu Display 11) Use [NEXT] to enter Cascade Delay Time. 12) Use [UP]/[DOWN] to select delay time. (Default: 2 minutes) 13) Press [ENTER] to confirm. Use [PREVIOUS]/[NEXT] to select ‘Appliance Figure 79: Cascade Hysterese Settings’...

  • Page 42: Error Screen

    Figure 82: Enter PIN# NOTE A Lockout Code and Internal Number are generated in the event of an error. The Internal Number is used by the DynaMax Controller to identify an error. To reset a Lockout error. Press and hold [RESET] until the error description line reads ‘None’...

  • Page 43: Part 10 Troubleshooting

    PART 10 TROUBLESHOOTING Table 37: Troubleshooting Table COMPONENT FAILURE MODE ANALYSIS • Two wires interchanged, E21 • No effect on safety Incoming Power • Live and Neutral wires are interchanged. • The 24Volts and 120 Volts • Transformer immediately burns out, replace Transformer wired are interchanged transformer...
  • Page 44 SYMPTOM FAILURE MODE ANALYSIS • The boiler has failed to ignite • Verify that all air has been purged from gas line the burner after 3 unsuccessful • Inspect spark electrode and related wiring for attempts damage and connection errors •...
  • Page 45 SYMPTOM FAILURE MODE ANALYSIS • Supply Gas Issue • Refer to Part 3 Gas Connection in this manual. • Natural Gas Pressure should read between 3” w.c. and 14” w.c. • L.P. Gas Pressure should be at 11” w.c. • Air/Gas Mixture Issue •...
  • Page 46 SYMPTOM FAILURE MODE ANALYSIS • Stack temperature has • Measure the resistance of the flue sensor at room exceeded the limit set on the temperature, it should be approximately 10k . boiler. • The supply/outlet temperature • Verify that the system is full of water and that all air has exceeded the setpoint has been properly purged from the system temperature specified.

  • Page 47: Setting The Correct Combustion

    10.1 SETTING THE CORRECT COMBUSTION To adjust the high-fire setting Switch the main power off to the boiler by placing the Use the DynaMax Control Panel toggle switch in the ‘OFF’ position Press the [MENU] button > select Appliance Settings and Switch the main power on to the boiler and adjust press [ENTER] >...
  • Page 48 DM 200 – 399 DM 500 – 750 Figure 88: DM 200 – 399 Gas Valve Figure 89: DM 500 - 750 Gas Valve To adjust the high-fire setting To adjust the high-fire setting Use the DynaMax Control Panel Use the DynaMax Control Panel Press the [MENU] button >...

  • Page 49: Part 11 Maintenance

    CAUTION It is important that all gas appliances be serviced by a qualified technician trained by Camus Hydronics. It is in your own interest and that of safety to ensure that all local codes, and all the “NOTES” and “WARNINGS” in this manual are complied with.

  • Page 50: Condensate Treatment

    NOTE 11.5 IGNITER AND FLAME SENSOR ELECTRODES All gaskets on disassembled components must be replaced The direct spark igniter is to be checked at every service with new gaskets/sealant on re-assembly, if required. Gasket interval. Clean the direct spark igniter as required to maintain kits are available from the factory peak ignition efficiency.

  • Page 51: Combustion And Ventilation Air

    • 11.11 FREEZE PROTECTION FOR INDOOR & Remove the direct spark igniter and the flame sensor. OUTDOOR INSTALLATIONS • Remove the three (3) T-25 screws holding the front Installations are not recommended in areas where the burner flange in place to gain access to the burner. danger of freezing exists.

  • Page 52: Part 12 Installations

    Pipe supports could allow the pipe to slide resulting in noise PART 12 INSTALLATIONS transmitted into the system. Padding is recommended. The boiler pressure relief valve must be piped to a suitable floor WARNING drain. See Section 4.11. Before starting the boiler, smell near the floor and around the boiler for any gas odours or any unusual odour.

  • Page 53: Domestic Hot Water With Storage Tank

    Placing the Boiler in Operation Boiler Operation Pre-Start Check List Appliance should begin the start-up process for Review the location of the boiler, clearances the sequence of operation. from combustible surfaces and available The boiler will fire at 50% of rated input on service clearances.

  • Page 54: Temperature Rise At Full Firing Rate

    12.10 TEMPERATURE RISE AT FULL FIRING Table 39: Temperature Rise Across Heat Exchanger (Hydronic Heating) RATE TEMPERATURE RISE ACROSS HEAT The pump must run continuously when the burner is firing. EXCHANGER With the pump running and the burner in the water F (19.4 MODEL F (16.7...

  • Page 55: Setting The Correct Combustion

    Procedure to Setup a Cascade System (Master Boiler) 12.11 SETTING THE CORRECT COMBUSTION • Using the DynaMax Control Panel access the Refer to Section 10.1 Setting the Correct Combustion. Cascade Control screen. 12.12 CASCADE SETUP • MENU > Appliance Settings > Cascade Control •...

  • Page 56: Ignition Cycle

    12.14 IGNITION CYCLE The ignition cycle is shown in the table below. The values are the default factory settings. Table 41: DynaMax Ignition Cycle State Standby Pre Purge Safety ON Safety Ignit_0 Ignit_1 Burn Post Post Purge_0 Purge_1 5s after Limited to fan speed 24 hours...

  • Page 57: Part 13 Piping Diagrams

    PART 13 PIPING DIAGRAMS Figure 94: Single Boiler Hydronic Heating Zoned Piping Arrangement This piping arrangement is designed for: Central Heating Mode: 0, 1, 2, or 3 DHW Mode: 0 Boiler Address: 100...
  • Page 58 Figure 95: Single Combination Boiler Zoned Piping Arrangement Central Heating Mode: 0, 1, 2, or 3 DHW Mode: 3, or 4 Boiler Address: Boiler Address = 100...
  • Page 59 Figure 96: Single Boiler Hydronic Heating & Indirect Storage Tank Zoned Piping Arrangement Central Heating Mode: 0, 1, 2, or 3 DHW Mode: 1, or 2 Boiler Address: Boiler Address = 100...
  • Page 60 Figure 97: Single Boiler Hydronic Heating & Indirect Storage Tank Non-Zoned Piping Arrangement Central Heating Mode: 0, 1, 2, or 3 DHW Mode: 1or 2 Boiler Address: Boiler Address = 100...
  • Page 61 Figure 98: Single Boiler Hydronic Heating & Direct Storage Tank Zoned Piping Arrangement Central Heating Mode: 0 DHW Mode: 1 or 2 Boiler Address: Boiler Address = 100...
  • Page 62 Figure 99: Multiple Boiler Hydronic Heating Zoned Piping Arrangement Central Heating Mode: 0, 1, 2, 3 DHW Mode: 0 Boiler Address: Master Boiler Address = 101 Slave Boiler Address = 102...

  • Page 63: Part 14 Exploded View & Parts List

    PART 14 EXPLODED VIEW & PARTS LIST DYNAMAX WALL HUNG...

  • Page 64: Dynamax Floor Mount

    DYNAMAX FLOOR MOUNT...
  • Page 65 DynaMax Models Name of Part Part ID 4 + 1 Wall 5 + 2 Wall 8 + 4 Wall 8 + 4 Floor Heat 10 + 6 Floor Exchanger 15 + 8 Floor 18 + 10 Floor 24 +11 Floor 24 + 12 Floor 80,000 BTU 100,000 BTU...
  • Page 66 DynaMax Models Name of Part Part ID VK8115 V1036 Gas Valve VR8615VB1044/B V8730V1015 Astro 30 Astro 50 Pump (Non E- Series) PL30 PL36 PL45 Pump (E- Series) Pump (H- Series) GM20-70-011 Mixing Chamber GM20-70-020-01 Air Pressure 8021205256 Switch 3-Way Valve (Combination VC4011ZZ02/E Models ONLY)
  • Page 67 DynaMax Models Name of Part Part ID DynaMax Wall Mount Support 14-5409 Frame Assembly DynaMax Wall 14-5410 Mount Bracket Front DynaMax Wall 14-5411 Mount Rear Bracket DynaMax Wall 14-5412 Mount Bezel Stiffener Plate DynaMax Wall 14-5413 Mount Controller Plate DynaMax Wall Mount 14-5415 Electrical...
  • Page 68 DynaMax Models Name of Part Part ID DynaMax Floor Front Panel 14-5508 Bottom Dynamax Floor Side Panel Left 14-5509 Front DynaMax Floor Control Panel 14-5510 Plate DynaMax Floor HX Support 14-5511 Frame DynaMax Floor 14-5512 Support Plate DynaMax Floor 14-5513 Bracket Right DynaMax Floor 14-5514...
  • Page 69 DynaMax Models Name of Part Part ID Electrical Strip 14-5420 Plate Protector DynaMax Wall Mount Air 44-0008 Intake Adapter DynaMax Floor Mount Plastic 44-0009 Flange with 3" Street Elbow DynaMax Floor Mount Air 44-0010 Intake Adapter GM10-25-018 Igniter Gasket Flame Sensor GM10-25-004 Gasket GM10-25-098-01...
  • Page 70 DynaMax Models Name of Part Part ID DynaMax Fan 14-0377 Discharge Orifice Expandable Air Inlet Adapter 14-0378 w/o Pressure Test Point Expandable Air 14-0379 Inlet Adapter 2" Diameter Flex Pipe 3" Diameter Flexible Stainless Steel 66-0075 Pipe 1" X 11" Flexible Stainless Steel 66-0073...

  • Page 71: Part 15 Electrical Diagrams

    PART 15 ELECTRICAL DIAGRAMS 15.1 DM 80- 250 INTERNAL WIRING DIAGRAM (WALL HUNG MODELS)

  • Page 72: Dm 210- 750 Internal Wiring Diagram (Floor Mount Models)

    15.2 DM 210- 750 INTERNAL WIRING DIAGRAM (FLOOR MOUNT MODELS)

  • Page 73: Field Wiring

    15.3 FIELD WIRING 15.3.1 System Sensor The temperature of the primary return can be controlled by If outdoor reset is desired, the outdoor sensor needs to be installing a system sensor. The DynaMax Controller connected to the Outdoor Sensor location on the DynaMax automatically detects the use of this sensor and controls Terminal Board.

  • Page 74: Detailed Connector Description

    DETAILED CONNECTOR DESCRIPTION 15.4 Pin # Connector Connector Description Connector Connector Description Provides 120VAC to the Various Sensors DynaMax Controller Room Thermostat, 24VAC Earth/ Ground Control Panel, + 120VAC Neutral Supply/Outlet Sensor 120VAC Live Return/Inlet Sensor 3-Way Diverter Valve DHW Sensor/ Tank Stat DHW 120VAC Live Flue/Stack Sensor CH 120VAC Live...
  • Page 75 CONDENSING BOILER LIMITED WARRANTY DURATION OF LIMITED WARRANTY Camus Hydronics Limited (“Camus”) extends the following LIMITED WARRANTY to the owner of this appliance, provided Any limited warranty, including the warranty of mechantability that the product has been installed and operated in accordance imposed on the sale of the boiler under the laws of the state or with the Installation Manual provided with the equipment.
  • Page 76 CAMUS Hydronics is a CAMUS manufacturer CERTIFIED! Seal replacement parts for assures that most copper finned Reliability, Efficiency & serviceability are built water heaters into every heating single unit! boilers as well more as a information supplier specialty innovative HVAC products.

This manual is also suitable for:

Dmh 151Dmh 201Dmh 101Dmh 251Dmh 211Dmh 261 ... Show all

Table of Contents