BodyCraft GXP Assembly Instruction Manual page 7

STEP 1 ASSEMBLE MAIN FRAME
101
105
144
105
136
136
1
To ease the assembly process, Do Not tighten bolts until instructed.
You need two people to help you assemble GXP gym.
1. Attach Rear Stabilizer (3) to Main Frame (1), using two 1/2" X
1-1/2" Bolts (105), two 1/2" Smaller Washers (136).
2. Attach Seat Frame (4) to Main Frame (1), using one 1/2" X 3-
1/4" Hex Bolt (103) at low hole of Main Frame (1), two 1/2"
Smaller Washers (136) and one 1/2" Nylon Nut (144).
3. Attach Foot Plate (5) to the front of Seat Frame (4), using two
3/8" X 5-1/2" Hex Bolts (106), two 3/8" Washers (137) and two
3/8" Nylon Nuts (145).
4. Insert Shorter Red Pop Pin (101) into the thread hole on Main
Frame (1).
136
103
3
6
4
137
137
145
137
137
145
106
106
5