Table of Contents
Advertisement
Electric Motor
Electric Motor
DANGER
HIGH VOLTAGE ELECTRIC SHOCK HAZARD
This equipment uses high voltage power. Improper
contact with high voltage equipment will cause death
or serious injury.
•
Turn off and disconnect power cord before
servicing equipment.
•
This equipment must be grounded. Connect only
to grounded power source.
•
Use only 3-wire extension cords for 240V and
single phase models.
•
Use only 5-wire extension cords for 400 AC and
three phase models.
•
Ensure ground prongs are intact on power and
extension cords.
•
Do not expose to rain. Store indoors.
•
All electrical wiring must be done by a qualified
electrician and comply with all local codes and
regulations.
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury from
pressurized fluid, such as skin injection, splashing fluid
and moving parts, follow the Pressure Relief Proce-
dure when you stop spraying and before cleaning,
checking, or servicing the equipment.
18
Removal
1 Phase, 240 VAC, 50 Hz Electric Motor
DA
ti18343a
1. Relieve pressure, page 9. Unplug power cord.
2. Remove Fan Belt, page 14.
3. Loosen electric motor nut (205). Swing motor
retainer bracket (204) out.
ti5384a
4. Remove motor assembly from sprayer.
5. Remove four screws (30), nuts (174), handle (175),
bottom isolator plate (190) and motor mounting
plate (99) from electric motor.
6. Loosen set screws (133) and remove pulley (43)
from electric motor.
133
205
43
99
204
193
191
192
119
30
175
190
174
ti18192a
3A2247A
Advertisement
Table of Contents
