Table of Contents
Advertisement
Electric Motor Starter
DANGER
HIGH VOLTAGE ELECTRIC SHOCK HAZARD
This equipment uses high voltage power. Improper
contact with high voltage equipment will cause death or
serious injury.
•
Turn off and disconnect power cord before
servicing equipment.
•
This equipment must be grounded. Connect only to
grounded power source.
•
Use only 3-wire extension cords for 240V and
single phase models.
•
Use only 5-wire extension cords for 400 AC and
three phase models.
•
Ensure ground prongs are intact on power and
extension cords.
•
Do not expose to rain. Store indoors.
•
All electrical wiring must be done by a qualified
electrician and comply with all local codes and
regulations.
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury from
pressurized fluid, such as skin injection, splashing fluid
and moving parts, follow the Pressure Relief Procedure
when you stop spraying and before cleaning, checking,
or servicing the equipment.
3A2247A
Removal
DA
3 Phase, 400 VAC, 50 Hz, Electric Motor Starter
205
43
204
190
1. Relieve pressure, page 9. Unplug power cord.
2. Remove Fan Belt, page 14.
3. Loosen electric motor nut (205). Swing motor
retainer bracket (204) out.
ti5384a
4. Remove motor assembly from sprayer.
Electric Motor Starter
119
30
175
30
195
ti18617a
193
191
192
198
200
ti18749a
15
Advertisement
Table of Contents
