Preparation For Installation - HIKVISION E Series Installation Manual

Installation Manual of E Series 5-inch Speed Dome
 Basic requirements.
 All the electronic operation should be strictly compliance with the electrical safety
regulations, fire prevention regulations and other related regulations in your local region.
 Check whether all the accessories are included and make sure that the installation place and
mode conform to the demands. If not, please contact the supplier.
 Please use this product according to the requirement of working environment.
 Check installation space.
Make sure the place have enough space to install the speed domes and its accessories.
 Check the intensity of conformation at the installation location.
Please make sure that the ceilings or walls are strong enough to withstand required times the
weight of speed dome and its accessories.
 Preparation of cables.
 For analog speed dome, choose the video cable according to the transmission distance. The
video should meet the least demands as: 75Ω resistance; 100% copper core conducting wire;
95% weaving copper shield.
 For analog speed dome, RS485 communication cable, please refer to Appendix 2.
 24V AC power cable, please refer to Appendix 3.
 Please keep all wrappers.
Please keep all wrappers after unpack them for future use. In case of any failure occurred, you
need to return the speed dome to the factory with the original wrapper.
Note: Transportation without the original wrapper may result in damage on the speed dome
and lead to additional costs.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.

Preparation for Installation

5