Table of Contents
Advertisement
2 Installation
2.1 Installation Preparation
Before you start:
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your required output to avoid damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera and the
bracket.
If the wall is cement, insert expansion bolts before
installing the camera. If the wall is wooden, use
self-tapping screw to secure the camera.
If the product does not function properly, contact
your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
2.2 Standing Mounting
Steps:
1. Take the bracket out of the package.
2. Align the camera body to the bracket, and rotate the
camera body to fix it with the bracket.
3. Put the camera on the flat surface.
2.3 Ceiling Mounting
Paste the drill template to the ceiling.
Drill the screw holes according to the drill template.
Bracket
Install the Camera Body
Drill Template
1
Screw hole All:for Mounting Base
Drill Template
1
Advertisement
Table of Contents
