Pole Mounting - HIKVISION E Series Installation Manual

Installation Manual of E Series 5-inch Speed Dome
φ59-82mm, φ84-108mm, φ103-127mm, φ130-152mm, φ155-178mm, φ180-203mm, φ194-216mm;
Customized dimensions can also be provided according to your requirement.
Note: The dimensions of the pole mounting hoop must match with the diameter of the pole
adapter.
 Mounting Accessories

3.3.2 Pole Mounting

Before you start:
The pole mounting is applicable to the indoor/outdoor solid pole construction. The followings are
the mandatory precondition for mounting:
 The mounting dimensions of the stainless steel hoops must meet the diameter of pole.
 The pole construction must be strong enough to withstand more than 8 times the weight
of the dome and its accessories.
Steps:
1. Assemble the pole adapter.
(1) Loosen the three stainless steel hoops with a screwdriver.
(2) Insert them through the rectangle holes of the pole adapter.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure 3-12 Stainless Steel Hoops
Figure 3-13 Hex Screws (M8×30) and Spring Washers
25