HIKVISION E Series Installation Manual page 21

Installation Manual of E Series 5-inch Speed Dome
Wall mounting is applicable to the indoor/outdoor solid wall construction. The followings are the
mandatory precondition for wall mounting:
 The wall must be thick enough to install the expansion screws.
 Please make sure that the wall is strong enough to withstand more than 8 times the weight of
the dome and the mount.
Steps:
1. Drill 4 screw holes in the wall according to the holes of the mount, and then insert M8
expansion screws (not supplied) into the mounting holes.
2. Attach the gasket(not supplied) then wall mount to the wall by aligning the 4 screw holes of the
mount with expansion screws on the wall.
3. Secure the wall mount with 4 hex nuts and washers.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure 3-3 Drill Mounting Holes
Nuts and Washers
Figure 3-4 Secure the Mount
Expansion Screws
20