Product Features; Installation Preparation - HIKVISION DS-2CE16D0T-WL3 User Manual

1.1

Product Features

The camera is applicable for outdoor conditions, and the
application scenarios include road, parking lot, campus,
etc..
The main features are as follows:
High performance CMOS sensor

1080p resolution

Auto white balance

Auto electronic shutter

Auto gain control (AGC)

White supplement light

Up the Coax (HIKVISION-C)

1.2 Overview
1.2.1 Type I Camera Overview
Sun Shield
Lens
Figure 1. 1 Type I Camera Overview
1.2.2 Type II Camera Overview
Sun Shield
Lens
White Supplement
Figure 1. 2 Type II Camera Overview
2.1

Installation Preparation

Before you start:
Make sure that the device in the package is in good

condition and all the assembly parts are included.
Make sure that all the related equipment is power-off

during the installation.
Check the specification of the products for the

installation environment.
Check whether the power supply is matched with your

power output to avoid damage.
Make sure the wall is strong enough to withstand three

times the weight of the camera and the bracket.
If the wall is cement, insert expansion bolts before you

install the camera. If the wall is wooden, use self-
tapping screws to secure the camera.
If the product does not function properly, contact your

dealer or the nearest service center. Do NOT
Introduction
Supplement Light
Supplement Light
Light
Installation
White
White
Switch Cable
TVI Video Cable
Power Cord
(12 VDC )
Switch Cable
TVI Video Cable
Power Cord
( 12 VDC)