Installation Preparation - HIKVISION Turbo HD DS-2CE16D0T-IRF User Manual

All manuals and user guides at all-guides.com
1.2.2 Type II Camera Overview
Switch
Video
Button
Cable
Power
Cord
Figure 1. 2 Type II Camera Overview
Note:
Press the switch button for 5 seconds to switch the
video output with TVI, AHD, CVI, and CVBS available.
1.2.3 Type III Camera Overview
Enclosure
Trim Ring
Mounting
Base
Figure 1. 3 Type III Camera Overview
Note:
Click the switch button for 5 seconds to switch the
video output with TVI, AHD, CVI, and CVBS available.
Installation
2.1

Installation Preparation

Before you start:
Make sure that the device in the package is in good

condition and all the assembly parts are included.
Make sure that all the related equipment is power-off

during the installation.
Check the specification of the products for the

installation environment.
Check whether the power supply is matched with

your power output to avoid damage.
Make sure the wall is strong enough to withstand

three times the weight of the camera and the
mounting bracket.
If the wall is cement, you need to insert expansion

bolts before you install the camera. If the wall is
wooden, you can use self-tapping screws to secure
the camera.
If the product does not function properly, contact

your dealer or the nearest service center. Do NOT
Mounting
Base
Trim Ring
Enclosure
Camera
Main Body
Video
Power
Cable
Cord
Switch
Button