Advertisement
1.2.3 Type III Camera Overview
Black Liner
Figure 1. 3 Type III Camera Overview
Note:
Press and hold the switch button for 5 seconds to switch
the video output. Four kinds of video outputs are
available: TVI, AHD, CVI, and CVBS.
1.2.4 Type IV Camera Overview
Black Liner
Figure 1. 4 Type IV Camera Overview
2.1
Installation Preparation
Before you start:
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with your
power output to avoid damage.
Make sure the wall is strong enough to withstand three
times the weight of the camera and the mounting
bracket.
If the wall is cement, insert expansion bolts before you
install the camera. If the wall is wooden, use self-
tapping screws to secure the camera.
If the product does not function properly, contact your
dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
Lens
Bubble
Bubble
Installation
Back Box
Lens
Base Plate
Power Cord
(12 VDC)
Video Cable (TVI)
Switch
Button
Power Cord
(12 VDC)
Video Cable (TVI)
Switch Button
Advertisement
