C h a p t e r 3
Rough-in Conduit and Wiring
This chapter contains instructions for conduit and wiring installation of the DRd rack
enclosure.
This chapter contains the following sections:
•
•
•
•
3
Rough-in Conduit and Wiring
Prepare the DRd Rack
Remove the DRd Rack Power Supply/Dimming Engine Access Panel
Modify Phase Bus for 120 VAC Split Phase Operation
Rough-in Conduit to the DRd Rack
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
18
. . . . . . . . . . . . .19
17