Panasonic DMR-HS2 Operating Instructions Manual page 7

Controls such as 0 function the same as the buttons on the remote control.
@ Remote control signal sensor ....................... 10 @ L2 input terminals (L2) ............................. 58
@ PC card slot (PC CARD). ........................... 25
f@ DV input terminal (DV INPUT). ....................... 58
@I Card eject button (EJECT) .......................... 25 @ Display
@ Disctray ......................................... 18 @ Channel buttons for recorder (v A, CH) ............... 19
@ HDD record lamp .................................. 18 @ Skip/Slow/Search buttons (w/+4, m/m). ..... 24,29
DVD record lamp .................................. 18
Center circle (e.g., DVD-RAM)
Rotating (REC):recording
Stopped (REC):recording paused
Rotating (REC, PLAY):
Chasing play or simultaneous
ret and play is in progress
Rotating (PLAY):playing
Stopped (PLAY):play paused
"PLAY" flashes:
the resume function (*page 23)
is working
0 Timer recording display
On: When timer recording is on standby (+page 34)
Flashes: When the unit couldn't go to timer recording standby
0 Disc type
@ The display mode of the main display section
TITLE: Title number
CHAP: Chapter number
TRACK: Track number
PG:
Program number
PL: Play list number
@ Recording mode ('page 19)
0 DVD indicator
Flashes: When you press [a, DVD POWER] to turn the unrt off
until it actually turns off
0 Card indicator
On: When a PC card is set in the unit ('page 25)
Flashes: When a PC card is being read/written to
@ Dubbing direction indicator
0 Channel
0 Main display section
Recording and play counter, and other miscellaneous messages
m
A half mirror is used for the unit display so the display may occasion-
ally be difficult to see depending on surrounding conditions.