Panasonic DMR-HS2 Operating Instructions Manual page 28

CANCEL 4
DVD +
.;i ..t: 1
A, v, 4, b -
ENTER
FUNCTIONS
44, . .
b
RETURN
DISPLAY
MARKER
Displaying the marker icon
I
1
During play
Press [DISPLAY].
The on-screen menus appear. (e.g., DVD-RAM)
2
Press [A, V] to select the "Play" and
press [,I.
3 Press [A, V] to select "Marker" and
press [b] to highlight the first
asterisk (*).
mmm
[ Marking positions
Press [4, F] to select an asterisk (*) and
You can mark positions by pressing [MARKER]. Also use on-screen
menus to mark, recall, and clear positions.
press [ENTER].
Mark up to 999 positions. The unit records the markers directly onto
One marker is added.
the disc and they remain intact even if you remove the disc.
Mark up to 5 positions. The markers clear when you open the disc
tray.
During play
Press [MARKER].
One marker is added.
When marking
positions
11 and above
mmm
@ Press 14, b] to highlight "1-10".
@ Press [A, f ] to select "1 l-20'!.
You can select the next group of
10 when the current group is full.
@ Press I+].
The first asterisk is highlighted.
@ Press [ENTER] to mark a position.
1 Playing from a marked position
I
Press [4, .] to select a marker number
and press [ENTER].
Play starts from the marked position.
Clearing markers
Press [4, .] to select a marker number
and press [CANCEL].
An asterisk replaces the number and the position is cleared.
To clear the on-screen menus
Press [RETURN].
Emi
l
You cannot use this feature if:
-the disc's elapsed play time is not shown in the display.
-you are using a play list. m m
-when Disc Protection (*page 38) or Cartridge Protection
(+page 8) is activated. m
l
Subtitles around markers may fail to appear.
l
Markers are cleared when you finalize DVD-R.
l
Markers on HDD, DVD-RAM and DVD-R are ordered by time, so
marker numbers can change when you add and delete them.