Panasonic DMR-HS2 Operating Instructions Manual page 69

Sound
No sound.
Low volume.
Distorted sound.
l
Check the connections. Check the input mode on the amplifier if you have connected one.
*Turn V.S.S. off if it causes distortion.
11,
56-58
51
Cannot switch audio during
stereo or SAP broadcasts.
l
You have used digital connection. Set "Dolby Digital" to "PCM" or connect to other equipment
using audio cables (analog connection).
l
You cannot change the audio type when using DVD-R or with LPCM recordings.
57,62
-
Play
A title or chapter doesn't play
l
Some titles and chapters on DVD-Video are not played when you have changed the ratings
when it is selected.
level.
Picture distorted during
search.
Alternative soundtrack and
subtitles cannot be selected.
Angle cannot be changed.
You have forgotten your rat-
ing% pmsword,
Displays
c frigwt th&kk 'coirectly W&I $~e iabal- f&&g up.
@This
unit &nnot @ay discs ather.than DVD-RAM, QVD-R, DVDYideo, Video CD, and CD.
*The disc is dirty. Ctean it.
@The disc may be badly scratched.
l
You inserted a blank DVD-RAM or DVD-R.
*Some distortion is normal.
*The languages are not recorded on the disc.
*You may have to use the disc's menus to select languages.
* SuMtIes are not recorded on the disc.
@Turn-he subti!!es 0%
#This function depends on software availability. Angles can only be changed during scenes
where different angles are recorded.
*Return the ratings setting to "8". Press [DVD] and th@n [I OPEN/CLO$E]. While the disc tray
is opan, pmss and hotd [ M4/44] and [,+/W-l f on the m&n unit at tie same time for 5 or
more secopn&.
The display is dim.
*Go to Display in the SETUP menus and change the display's brightness with "FL Display".
"12:OO"' is flashing on tha
unltk dhpfaya
*The clock is nut set. Go to $8 Wp in the SETCIP menus and set the clock with "Clock settings".
The displayed recording time
l
Displayed recording time is calculated based on the number of frames recorded per second.
and actual recording time dif-
This number is subject to minute variation. When the recording time is long the cumulative
fer.
effect of these small differences may result in the slight variation you may sometimes find
between displayed recording time and actual recording time. This is normal.
Remote control
control doesn't
work, :
Cannot operate the televi-
sion.
I
l
[DVD, TV] is not switched to "DVD", Switch to "DVD" when operating this unit,
*The timute control and main unit are usin different codes. Change the code on the remote
cqntrol or main unit.
*The batteries are depleted, Replace them with REW ones.
+ Point the remote controt at the remote control sensor on the main unit.
l
Remove obstacles from between the remote control and i-nain
unit.
6
65
10
10
-
l
Change manufacturer code. Some televisions cannot be operated even if you change the code.
17
l
[DVD, TV] is not switched to "TV". Switch to "TV" when selecting the receiving channel for the
6
television.
62
-
-
23
-
50
-
-
61
64
-