Panasonic DMR-HS2 Operating Instructions Manual page 16

STEP 5 Selecting TV screen type
r
RETURN
Change the settings if you:
l
Connect the unit to a widescreen 16:9 aspect television.
+Set "TV Aspect" to "169".
*Connect the unit through the COMPONENT VIDEO OUT
terminals (+page 11) to a television compatible with progressive
video signals (480P).
+Set "TV Type" to "48OP".
1
Press [SET UP] to show the menus.
Press [A, v] to select "TV Screen"
and press [FJ.
3
Press [A, v] to select "TV
Aspect" and press [ENTER].
4
Press [A, v] to select "16:9" and
press [ENTER].
3
Press [A, 'I] to select "TV
Type" and press [ENTER].
4 Press [A, Yj to select "480P" and
press [ENTER].
l When playing back, select Video in the on-screen menu
and set "Transfer" according to the type of material being
played (*page 52).
To return to the previous screen
Press [RETURN].
When you are finished
Press [SET UP].
n Regarding Progressive Television Picture
Progressive image aspect (height to width ratio) is set at a standard
16:9. DVD-Video which has been set at 16:9 will be displayed
correctly. However, 4:3 video material (+ below) will be stretched to
the right and left when displayed.
To view the picture at the right aspect
l
For televisions that allow the aspect of progressive images to be
adjusted, use the function provided on the television and adjust
as necessary.
@For televisions which do not allow the aspect of progressive
images to be adjusted, please turn OFF "Progressive"
(+page 52).
4:3 video materials are usually found
l
In general television broadcasts (excluding some wide picture
broadcasts) and any pictures from discs that recorded such
programs.
l
In DVDs with an aspect ratio of 4:3 indicated on the jacket.
l
DVD-R or Video CD pictures