Panasonic DMR-HS2 Operating Instructions Manual page 52

Not available when playing CDs.
Rem
Picture
MPEG-ONR
Content
Normal
Soft:
Soft picture with fewer video
artifacts
Fine:
Cinema:
Details are sharper
Mellows movies, enhances
detail in dark scenes.
User: You can make further
adjustments. See below.
(When any item other than "User" is
selected)
You can turn the recommended
settings for 3D NR, block NR, and
mosquito NR on and off.
ON-OFF
H When "User" is selected
Select "Detail picture adjustment".
("User" + [+I + [V] + [ENTER])
5
Page l/2 of "Detail picture adjustment"
Contrast Increases the contrast between light and
dark parts of the picture (-7 to +7).
Brightness
Sharpness
Brightens the picture (0 to + 15).
Adjust the sharpness of the edges of the ver-
tical lines (-6 to +6).
Color Adjusts the shade of the picture's color (-7
to +7).
Press [ENTER] to enter the setting.
Press [A] or [V] until page 2/2 appears.
Page 2/2 of "Detail picture adjustment"
Gamma Increases the brightness of the center
ranges to improve detail and contrast in dark
scenes (0 to +5).
3D NR
Block NR
Mosquito NR
Reduces overall noise (0 to +4).
Smoothes block noise (0 to +3).
Reduces the smudging that appears around
contrasting sections of the picture (0 to +3).
n When you have set "TV Type" to "48OP" in
SETUP (*page 16)
Transfer"
Content
ON: Enables progressive output
OFF:
Disables progressive output
Select the method of conversion for progres-
sive output to suit the type of material being
played (+page 66, Film and video).
Auto1 (normal): For film material
Auto2:
For film material (the same as
Auto1 , but able to convert 30-
frame-per-second progressive
video.)
Video: For video material
:*' Only applicable in cases where the "Progressive" function is ON.
Press {ENTER] to enter the setting
FlQT6570