Panasonic DMR-HS2 Operating Instructions Manual page 11

STEP
2 Antenna and television connections
Preparation
l
Refer to the television's operating instructions.
l
Turn the television off and disconnect its AC power supply cord.
To enjoy sound through other audio equipment
You can output digital signals from this unit's DIGITAL AUDIO OUT
terminal, enabling you to enjoy the powerful surround effects found
on discs recorded with Dolby Digital or DTS. Connect an amplifier
with built-in decoders. See page 57 for connection examples.
To enjoy progressive video
l
Connect to the component video (480P) input terminals on a televi-
sion compatible with this unit's copy guard system. (Video will not be
displayed correctly if connected to an incompatible television.)
*Set "TV Type" to "48OP" in STEP 5 Selecting TV screen type
(+page 16).
l
When playing back, select Video in the on-screen menu and set
"Transfer" according to the type of material being played
(+page 52).
For your reference
To enjoy CATV (+page 56)
All Panasonic televisions that have 480P input terminals are com-
(You need to subscribe to a cable TV or satellite TV service to enjoy
patible. Consult the manufacturer if you have another brand of tele-
viewing their programming.)
vision.
Television
<mi
AC power supply cord (included)
Connect last.
Also connect the AC power supply
cords for the other equipment.
Red White Yellow
Q
kleo I75 Audio/L
cable (included)
cable4
(included) +below
6 It the connect
To household AC outlet
(AC 120 V. 60 Hz)
To the antenna
Outdoor antenna
Indoor antenna
or
match
Antenna cable
(usually
disconnected
from the
\Jelevision)
I
75
u coaxial cable
*The signal from the antenna passes through this unit and along the
75 Q coaxial cable to the television even when this unit is turned off.
You don't have to connect the antenna to the television.
l The picture and sound signal from this unit does not go through
the 75 Q coaxial cable to the television. Make sure you connect
one of the following terminals on this unit to the television: the
AUDIO/VIDEO terminal, the S-VIDEO OUT terminal or the
COMPONENT VIDEO OUT terminal. If the television has none
of these terminals, consult your local dealer.
Conserving power
This unit consumes a small amount of power, even when it is
turned off (approx. 3.3 W). To save power when the unit is not to
be used for a long time, unplug it from the household AC outlet.
mit
S-VIDEO OUT terminal
The S-VIDEO OUT terminal achi&es a more vivid picture
than the VIDEO OUT terminal by separating the chromi-
nance (C) and luminance (Y) signals. (Actual results
depend on the television.)
Television
--~
S video cable
(not included)
*Q-=7-
When making this connection, ensure you connect the
audio cables to the corresponding audio input terminals
on the television.
--.
COMPONENT VIDEO OUT terminal
These terminals can be used for either interlace or ssive outpul
and provide a purer picture than the S-VIDEO OUT terminal.
Connection using these terminals outputs the color difference
signals (P,/P,) and luminance signal (Y) separately in order to
achieve high fidelity in reproducing colors,
l The description of the component video input terminals
depends on the television or monitor (e.g. Y/PB/P~, Y/B-Y/R-Y,
Y/C&,). Connect to terminals of the same color.
Television
Video cable
When making this connection, ensure you connect the
audio cables to the corresponding audio input terminals
on the television,
.-
_.-