Panasonic DMR-HS2 Operating Instructions Manual page 14

STEP
4 VCR Plus+ guide channel
STEP
4 VCR Plus+ guide channel
CANCEL
A, v, 4, b
ENTER
RETURN
SET UP
'.
Set these guide channels so you can use VCR Plus+ codes for
timer recording. Before starting the settings, prepare a chart show-
ing the channels, station names, and guide channels.
Set these guide channels so you can use VCR Plus+ codes for
timer recording. Before starting the settings, prepare a chart show-
ing the channels, station names, and guide channels.
e.g.,
Station
name
Guide
channel
Channel
number
i
I I I
CBS 04 04
I +o
Write down all the stations you
for the stations in magazines.
can receive.
0 The guide channel and channel numbers correspond so you do
not have to change the setting.
0 In step 5, enter channel 15 next to Guide Channel 33.
@ In step 5, enter channel 20 next to Guide Channel 38.
:
,: ',
3 1,, 1
P ress [SET UP] to show the menus.
-;;; I;
2 p
ress [A, v] to select "Channel" and
press [b].
settings
3
Press [A, v] to select "VCR Plus+
CH Setting" and press [ENTER].
e.g., when the current antenna system is CATV.
4 Press [A, v] to select the guide
channel you want to set and press
PI.
When selecting the guide channel, press and hold [A, v] to
scroll the screen up and down.
5 Press [A, v] to select the channel
corresponding to the guide channel
and press [+I.
To delete a number, press [CANCEL].
Repeat steps 4 and 5 as necessary.
6
Press [ENTER].
The "Channel" screen reappears.
To return to the previous screen
Press [RETURN].
When you are finished
Press [SET UP].
VCR Plus+ and PlusCode are registered trademarks of Gem-
star Development Corporation. The VCR Plus+ system is manu-
factured under license from Gemstar Development Corporation.
Pats. 5,307,173; 5,335,079; 4,908,713; 4,751,578; and
4,706,121