Panasonic DMR-HS2 Operating Instructions Manual page 64

1 Press [SET UP] to show the menus.
2
Press [A, V] to select "Set Up" and
press [b].
Proceed with the
steps described
below.
ii
2
Auto Clock Setting
3 Press [A, V] to select "'Auto Clock
Setting" and press [ENTER].
If you have not yet set channels, the "Auto Channel/Clock
Setting" screen appears.
4 Press [ENTER].
Auto setting starts. This can take some time, up to a few
hours in some cases. (To stop auto clock setting, press
[RETURN].) The following screen appears when setting is
complete. Press [ENTER].
*If the time was not set correctly, use manual clock setting or time
zone adjust.
l
If you connect the unit through a cable TV box or DSS receiver
(+page 56), tune to your local PBS station before starting auto
clock setting. Use manual clock setting if this does not work or if
there is no local PBS channel in your area.
l
DST, Daylight Saving Time, shows the summertime setting.
*TIME ZONE shows the time difference from Greenwich meantime
(GMT).
EST=GMT -5, CST=GMT -6, MST=GMT-7, PST=GMT-8,
AST=GMT -9, HST=GMT-10, For other areas: xx hr
Manual Clock Setting
3 Press [A, V] to select "Manual Clock
Setting" and press [ENTER].
Press 14, b] to select the item you
want to change and press [A9 V] to
change the setting.
MONTH -DAY-YEAR-HOUR (12-hour display)
LTIME ZONE-DST++MINUTEa
DST (Daylight Saving Time): ON or OFF
If you select "ON", the clock is advanced one hour starting
at 2 a.m. on the first Sunday in April and ending at 2 a.m. on
the last Sunday in October.
TIME ZONE:
EST+>CST*MST*PSTtAST*HST
t-51
C-6)
(-7)
k-8)
t-91 l-10)
T m
5 Press [ENTER].
The "Set Up" screen (+step 2) reappears and the clock
starts.
When you change the time zone, the recording times for programs
recorded before the time zone was changed also change to corre-
spond to the new time zone.
Time Zone Adjust
1
Adjust the time zone (-1 or +I) if it was not set correctly with auto
clock setting. You cannot change this setting if you set the clock
manually.
3 Press [A, V] to select "Time Zone
Adjust" and press [ENTER].
4
Press
[A,
V] to select "-I", "O", or
"+I" and press [ENTER].
The "Set Up" screen (*step 2) reappears.