Panasonic DMR-HS2 Operating Instructions Manual page 44

PLAY LIST
RETURN
1
While stopped
Press [PLAY LIST].
2 Press [A, V] to select "-- --/--" and
press [ENTER].
3 Press [ENTER] at the start point.
HDD:The location of the '-
whole program's start point
DVD-RAM: The location of
the whole disc's start point
4 Press [ENTER] at the end point.
'3 .W mm
s
Specify start and end points to create scenes, then specify the order
in which they are to be played. These scenes are not recorded sep-
arately so this doesn't use much capacity.
You can create a maximum of 99 play lists and 999 scenes on a
DVD-RAM and HDD.
HDD:The location of the '.
whole program's end point
DVD-RAM: The location of
the whole disc's end point
To specify another scene
Select "Next" and press [ENTER], then repeat steps 3 and 4.
5 Press [A, V] to select "Exit" and
press [ENTER].
The play list screen appears.
To clear the play list screen
Press [RETURN].
To stop partway through
Press [RETURN].
For your reference
l
You cannot create or edit play lists if the disc is protected. m
*You cannot specify an end point before a start point, or a start
point after an end point.
*You may not be able to specify points within 3 seconds of each
other.
l
Use search and slow-motion to find the start and end points.
l
Play pauses if the end of the last program on the disc is reached
during this procedure.
@Depending on the state of recording, the actual number of play
lists that can be recorded may be less than that specified in this
manual.
aPressing [ 141, [WI] in step 3 and 4 allows you to select pro-
grams in the same drive.