Panasonic DMR-HS2 Operating Instructions Manual page 59

Use one of the following connections to suit the antenna lead.
H A single twin lead
300-75 fII transformer
(not included)
from the anten
To this unit's
RF IN terminal
(Flat)
Twin lead
300 R cable
n A twin lead and a coaxial cable
from the antenna
Twin lead
300 Q cable
(Round)
75 !I coaxial cable
To this unit's
RF IN terminal
W Two twin leads
from the antenna
Twin lead
VHF/UHF band mixer
(not included)
To this unit's
+
RF IN terminal
l
If your television has both lead and coaxial VHF terminals, use the
lead connection to minimize signal toss.
Use one of the following connections to suit the antenna terminals
on your television. Refer to the television's operating instructions.
H A twin lead and coaxial plug terminal
VHF/UHF band separator
(not included)
UHF
e
75 k2 coaxial cable
n A twin lead terminal
75-300 !L? transformer
75 R coaxial cable
_ VHF or
UHF
W Two twin lead terminals
Television
VHF/UHF band separator
(not included)
75 s1 coaxial cable
VHF
UHF
n Multiple antenna terminals
75 R coaxial cable
I
ANT 2
@Connect to one of the terminals, then change the television's
setting as necessary.