The relays are activated as shown in
the chart above. The containers
must be filled with the correct agent
in the order specified.
Do not use detergent or additives
containing chlorine or acidic agents.
The dispensing pumps are not used
for the Cottons Universal, Cottons
hygiene, Minimum iron, Curtains,
Quick wash or Extra rinse
programmes.
Empty sensor
When the Empty sensor is activated,
a message appears in the display to
show when an external liquid agent
container is empty (see
Settings/Supervisor level in the
menu).
If a container is empty, the following
message will come up in the display
before the start of the programme or
whilst the programme is running:
Fill the dispensing
i
container
OK
A programme that has already been
started continues to run until it has
finished.
^ Press the OK button to delete the
message in the display, and refill the
container.
If a Disinfection programme is
running, the following message is
displayed:
Fault
i
Container empty
OK
The programme will be cancelled.
^ Press the OK button to delete the
message in the display, and refill the
container.
^ Start the programme again.
,
If the container is empty for a
disinfection programme, you have to
assume that no disinfection has
taken place. Start the programme
again.
Detergent
31